Air Fuel Ratio not logging

[kevmo777]

I have tried all I know a searched the forum over trying to get my AFR to log. Every time I connect I get a 'unsupported parameter'. I'm using my wideband through my A/C voltage to input the signal. This is on my '01 z06. Config is here. Everything else works A/c voltage is logging and all. Just can't get the Air Fuel Ratio to log?????? Thanks for the help.

[69lt1bird]

You are using PID 2811 which is EGR voltage. I think you need PID 7101

[kevmo777]

You are using PID 2811 which is EGR voltage. I think you need PID 7101

I don't understand, on my #4 user defined parameters Air Fuel Ratio, the function string is using 7101 PID. Where do you see that I'm using PID 2811? Am I missing something? Thanks for the help.

[69lt1bird]

can you do a screen shot, your cfg doesn't show that when I open it. Odd

[miker2]

can you do a screen shot, your cfg doesn't show that when I open it. Odd

aren't custom pid's stored in the vcmconfig file ?

[kevmo777]

can you do a screen shot, your cfg doesn't show that when I open it. Odd

Here is the screenshot

[69lt1bird]

Try this:

[PID.7101]/.5+10

[kevmo777]

That did it!! I knew it had to be something simple! (it always is). Thank you for your help!!