Results 1 to 4 of 4

Thread: MPVI2 Prolink Analog Signals for Standalone Logging

  1. 01-29-2022 #1
    sohc_mshue
    sohc_mshue is offline
    Tuner in Training
    Join Date
    Dec 2010
    Location
    Richmond, VA
    Posts
    40

    MPVI2 Prolink Analog Signals for Standalone Logging

    Will we every be able to log analog signals while standalone logging with a prolink cable on MPVI2? MPVI1 had this ability.
    SHUETUNING
    Powertraincontrolsolutions
    Reply With Quote Reply With Quote
  2. 02-18-2022 #2
    R Horn
    R Horn is offline
    Tuner in Training
    Join Date
    Oct 2021
    Posts
    46
    Prolink is still not working in Standalone.

    Except from email 02/09/2022

    For the pro link+ channels disappearing, the engineers are aware of the issue and are currently working on a fix. Once the engineers find a resolution we will reach out on this ticket.
    Reply With Quote Reply With Quote
  3. 04-08-2022 #3
    R Horn
    R Horn is offline
    Tuner in Training
    Join Date
    Oct 2021
    Posts
    46
    At least with the MPVI2+ and the Prolink+ they currently have the two Analog channels working in Standalone with firmware 5.1.17

    The CAN channel is still vanishing in stand alone

    so Half Fixed!!
    Reply With Quote Reply With Quote
  4. 01-20-2023 #4
    Spcbrn
    Spcbrn is offline
    Tuner in Training
    Join Date
    Jun 2022
    Posts
    23
    Any news about this?

    Discovered today that my CAN wideband controller wasn't logged in standalone mode. If this isn't going to be supported this should have been stated on the Pro Features or Pro Link product page.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »