Fastest 1/4 mile with stock PCM and HPTuners?

[LosLS2]

I was curious if anyone knows what the fastest 1/4 mile time is with HPtuners software in the car?

I had my buddy Steve's car running 8.8's @ 160 MPH on nitrous before switching him to aftermarket and I am currently at 8.9 @ 153 with boost. Also mine is a 98 PCM.

[murphinator]

I believe zzp's twin turbo fwd v6 3800 car that ran 8.6 @159 is using hpt

as is Tim King from intense racing's f body v6 3800 turbo rwd ( the red one in rotation on hpt's home page that ran 8.90's)

a datsun pickup 3800 swap recently ran 7.90's but I dont know what software he uses , guy posts on 3800 pro so I could find out

gotta be an lsx car in the lower 7's using hpt ???

[LosLS2]

I believe zzp's twin turbo fwd v6 3800 car that ran 8.6 @159 is using hpt

as is Tim King from intense racing's f body v6 3800 turbo rwd ( the red one in rotation on hpt's home page that ran 8.90's)

a datsun pickup 3800 swap recently ran 7.90's but I dont know what software he uses , guy posts on 3800 pro so I could find out

gotta be an lsx car in the lower 7's using hpt ???

I doubt low 7's as the fastest stock suspension Fbody record on boost is around 7.3 and on the bottle is 7.7 IIRC.

That's an incredible 60' out of a fwd car to run an 8.6 at only 159.

[chummmma]

we have been 8.81 @157 in our street car with the stock pcm and blower. switching to a 91.5mm turbo now.

[murphinator]

I doubt low 7's as the fastest stock suspension Fbody record on boost is around 7.3 and on the bottle is 7.7 IIRC.

That's an incredible 60' out of a fwd car to run an 8.6 at only 159.

looks like a 1.35 60 foot , the slip is near the end of the vid , btw this is on a stock factory assembled short block other than cam and delete of balance shaft



http://www.youtube.com/watch?v=_1IBLusB3VM&NR=1

[VYSSLS1]

we ran 8.9@161 in our commodore.. stock IRS suspension in the rear etc...

[murphinator]

bump for a great question

come on lsx guys you gotta have some cars closer to 7's

[THE CHAD]

eddie tassone in perth vz pro street N/A gto monaro ran 8.32@163mph 488 RHS LSX....Tom Ursich vz ute pro street N/A 442 LSX ran [email protected] eddie ran 8.96@150mph vz gto 455 lsx twin turbo genuine street car and same car N/A ran 9.30@148mph and made 770plus rwhp....Perth has some of the quickest and most powerful LSX'S around and there are plenty more that make 1000rwhp plus and driven around with the standard pcm aboard...cheers.. one more eddie is currently building a monaro with a twin turbo 460 RHS LSX engine aiming for the quickest LSX in the world which stands at 6.84- Kurt Urban bout 10years ago and the current Australian record is 6.92@199mph so to do that time you need about 2000hp so eddie is aiming for 3000hp

[VYSSLS1]

um do some research.. quickest in the world is 6.31 @ 223 .
quickest in aus is 6.89 @ 203

I went 8.21 with the stock PCM..

[THE CHAD]

mate would you know the name of the quickest in world and aus cheers

[VYSSLS1]

1. 6.31 @ 223 Andreas Arthursson - Monte Carlo - Twin PT7675s - 396ci - 17x34.5x16 – 2550#s - http://youtu.be/PGFHt1Y3FrE

5. 6.89 @ 203 Steve Petrovski - 2004 Ute - 106mm - CV Kostecki LSX 427ci - AllPro Cathedral Heads - 4 Link - 34x17 - http://www.youtube.com/watch?v=mrfTDGaQCzU

all is here http://www.yellowbullet.com/forum/sh...=595882&page=2

ill be making a charge for the top 10 next time out..

[THE CHAD]

cheers mate, one word sick

[LSxpwrdZ]

I've got a couple 6 speed vettes in the 8's and a cam only 5.3 in the 8's on stock PCM. Unfortunately we don't get very many serious rides here in KY and I'm too broke to build one myself lol.

[04blackgmc]

I've got a couple 6 speed vettes in the 8's and a cam only 5.3 in the 8's on stock PCM. Unfortunately we don't get very many serious rides here in KY and I'm too broke to build one myself lol.

haahaha i hear ya there. I wish i had extra money laying around to make my vette alot faster.

For me its just a couple of 9 second sprayed fbodys with stock cubes.