Results 1 to 4 of 4

Thread: #'s over or under max??

  1. 10-25-2005 #1
    Bill@HPTuners
    Bill@HPTuners is offline
    HP Tuners Support
    (foff667)     Bill@HPTuners's Avatar
    Join Date
    Jun 2004
    Location
    Hailing from Parts Unknown
    Posts
    28,262

    #'s over or under max??

    there are a few parameters & such where it exceeds the min or max amount for whatever reason. A couple of instances are OS 12211492 for an auto v6 fbody max tq vs gear in the file i have it has 1000 but the max is 640...when i change it to say 999 instead of 1000 it goes directly to 640. Also in automatch v8 ls1 cars under the transmission diagnostics tab TCC clear min slip has a negative stock value...if you try and change it it goes directly to 0 since this is the lowest value. Just wondering why the stock value migh tbe over or under the supposed min/max.

    Thanks
    Bill
    It doesn't have to be perfect, it just needs to be done in two weeks...

    A wise man once said "google it"
    Reply With Quote Reply With Quote
  2. 10-25-2005 #2
    xonelith
    xonelith is offline
    Advanced Tuner xonelith's Avatar
    Join Date
    Oct 2004
    Location
    Whitby, Ontario, CANADA
    Posts
    408

    Re: #'s over or under max??

    Similar problem with the N-bodies:
    All Motor 2001 GA GT1



    Reply With Quote Reply With Quote
  3. 10-28-2005 #3
    rckrzy1
    rckrzy1 is offline
    Tuner
    Join Date
    Apr 2004
    Location
    Hurst TX
    Posts
    101

    Re: #'s over or under max??

    Quote Originally Posted by xonelith
    Similar problem with the N-bodies:




    I have contacted HP and gotten no response on this.
    2004 Chevy 1500 CC 5.3L 2000 Pontiac GA 3.4L 1995 Pontiac TA LT1 1997 Camaro 3.8L
    Reply With Quote Reply With Quote
  4. 11-03-2005 #4
    Chris@HPTuners
    Chris@HPTuners is offline
    HP Tuners Owner Chris@HPTuners's Avatar
    Join Date
    Mar 2003
    Posts
    4,861

    Re: #'s over or under max??

    the issue is this, the GM limit is very high (1280) and we have found thru extensive testing on V6 vehicles that this causes problems on all but GTP vehicles. Hence, we re-changed the limits back down to 640 for all V6 vehicles as this fixed the problem on all vehicles tested.

    Chris...
    I count sheep in hex...
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »