Results 1 to 2 of 2

Thread: Basic transmission question

  1. 04-30-2010 #1
    Fred007
    Fred007 is offline
    Tuner in Training
    Join Date
    Feb 2010
    Location
    Madison, WI
    Posts
    15

    Basic transmission question

    I have a LS1 from a 2000 Vette that had a manual transmission. I am switching to an automatic (4l65e) and pretty much have everything running now. The problem I am having is that I don't get any transmission data from the ECM. If I look at my tune file, which has the transmission portions from a stock 4l65e setup, under the Edit - Calibration Details page, it says a manual transmission. I'm wondering what I am missing, I can't seem to find any place to tell the ECM there is an automatic transmission there now. Am I missing a fundamentally big piece, like, my ECM won't support an automatic? Sorry for the basic question, need a push in the right direction. Thanks.
    Reply With Quote Reply With Quote
  2. 05-02-2010 #2
    Fred007
    Fred007 is offline
    Tuner in Training
    Join Date
    Feb 2010
    Location
    Madison, WI
    Posts
    15
    Sorry for this dumb question, figured it out. Used a 2000 Vette with auto stock tune as my starting point, now everything is working fine.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »