when will USB be ready??

[S2H]

This was a Picture From SEMA
From Left to Right
Standard - EIO - USB Standard - USB EIO - Superchips device - on the table USB EIO with cables attatched.
The EIO is the pluggable European type connector with screw terminals. No more pigtail.
(thats a much needed imporovement..I have repaired my current one several times with solder and new wire)
The firmware is field flashable, so it can be updated at any time.



all I can say is....BAM(hear it like Emeril would say it..LOL)

[Chris@HPTuners]

there's also a close up shot in this video:

http://www.hptuners.com/pub/SEMA_200...ooth_Final.mpg
14Mb

right click save-as.

[S2H]

BAM!!!

[Chris@HPTuners]

Now who's gonna be the first person to guess what MPVI stands for?

[az3.8camaro]

Is there any way I can order HPT now, and just have you guys ship me the USB unit when its ready?

[Arron]

MPVI

Multi Platform Vehicle Interface ?

[Missing2]

Now who's gonna be the first person to guess what MPVI stands for?

My
Poop is
Very
Interesting

???

[12secSS]

This was a Picture From SEMA
From Left to Right
Standard - EIO - USB Standard - USB EIO - Superchips device - on the table USB EIO with cables attatched.
The EIO is the pluggable European type connector with screw terminals. No more pigtail.
(thats a much needed imporovement..I have repaired my current one several times with solder and new wire)
The firmware is field flashable, so it can be updated at any time.



all I can say is....BAM(hear it like Emeril would say it..LOL)

Hey, were missing the best part of that pic. The mug shots!

[MeentSS02]

My
Poop is
Very
Interesting

???

Now that was pretty funny...as for the USB EIO...are the inputs the same as on the serial interface (as in, clip/strip the wires and screw them in to the same inputs as on my current unit)? Is the plug itself removeable?

[Arron]

Now that was pretty funny...as for the USB EIO...are the inputs the same as on the serial interface (as in, clip/strip the wires and screw them in to the same inputs as on my current unit)? Is the plug itself removeable?

The new inputs look like a much better setup , looks the same as my techedge wideband .

[MeentSS02]

Definitely...I'm already pinching my pennies for the upgrade. Plus I'm hearing rumors of a real time tuning solution...things are definitely progressing in the right direction.

[Missing2]

Now that was pretty funny...as for the USB EIO...are the inputs the same as on the serial interface (as in, clip/strip the wires and screw them in to the same inputs as on my current unit)? Is the plug itself removeable?

I am sure its still removable (it would suck if it wasent).. its the same style connector that are showing up on some car audio amps these days.. very nice as you can run a few differnt gauge size wires into it, and then quick disconnect it..

I dont see why they would screw with the pinout (unless they added more inputs/outputs) so as far as converting goes i am sure its just a matter of cutting off the end of the old pigtail and stripping those wires and inserting them into the new connector.

[LS1 Pontiac GTO]

This was a Picture From SEMA
From Left to Right
Standard - EIO - USB Standard - USB EIO - Superchips device - on the table USB EIO with cables attatched.
The EIO is the pluggable European type connector with screw terminals. No more pigtail.
(thats a much needed imporovement..I have repaired my current one several times with solder and new wire)
The firmware is field flashable, so it can be updated at any time.



all I can say is....BAM(hear it like Emeril would say it..LOL)

This looks sweet! Willyou still need a laptop for this? Any news on a release date?

BTW: when will the USB version of HP Tuners be ready?

[Bill@HPTuners]

This looks sweet! Willyou still need a laptop for this? Any news on a release date?

BTW: when will the USB version of HP Tuners be ready?

i believe you will still need a laptop with the usb version to flash & read the files...but for just datalogging you can have just the box if you'd like.

As far as when it will be ready, the internals are done but they are still waiting on the cases & labels to come in.

[kabbott]

My
Protocol is
Very
Important

Is this the new "are we there yet" thread?
New hardware looks nice,cant wait.

[MrDude_1]

ok, in about a month or so, im getting a EIO upgrade so i can use my LC1...
whats the diff money wise between me getting the serial EIO and the new USB EIO??

[WS6FirebirdTA00]

looks pretty damn sweet

[MeentSS02]

I can't wait for the USB to come out...thanks for the hard work fellas. And I'm really diggin this new forum layout!

[PurplePiss]

Tick Tock. Any ETA?

[Casey]

Dont start PurplePiss. And I mean it.
You have 8 posts on this forum. All 8 of them are the same question.


Ken