Results 1 to 7 of 7

Thread: Alloytech and removing vats

  1. #1
    Potential Tuner
    Join Date
    May 2010
    Posts
    1

    Alloytech and removing vats

    I wanted to know if the current version of HP tuners is capable of removing vats on the holden alloytec pcm?

    Ive got a university project comming up soon where I need to run some engines and would be good if I could do away with all the modules and run with just the engine pcm.

    Thanks Drew

  2. #2
    Quote Originally Posted by drewz View Post
    I wanted to know if the current version of HP tuners is capable of removing vats on the holden alloytec pcm?

    Ive got a university project comming up soon where I need to run some engines and would be good if I could do away with all the modules and run with just the engine pcm.

    Thanks Drew
    not yet, i haven't looked into it

    Chris...
    I count sheep in hex...

  3. #3
    Potential Tuner
    Join Date
    Apr 2011
    Location
    perth WA
    Posts
    5
    hi just wondering if disabling VATS or pairing VATS has been looked into yet ??
    i have a vz commodore alloytec stuck in workshop. i have version 2.22 and it will not let me pair VATS.

    thanks
    dave

  4. #4
    Tuner in Training
    Join Date
    Jan 2011
    Posts
    11
    I did an 05 CTS and it's not running, tried everything and now I'm wondering if VATS is really disabled too.

  5. #5
    Advanced Tuner
    Join Date
    Dec 2005
    Location
    Sydney Australia
    Posts
    510
    you cant do it,
    if it was a conversion i would seriously consider fitting a cable throttle body and a after market ECU like a Haltech Sport 2000 which runs these engines perfectly

  6. #6
    Potential Tuner
    Join Date
    Dec 2023
    Posts
    1
    Quote Originally Posted by Chris@HPTuners View Post
    not yet, i haven't looked into it

    Chris...
    Hi Chris@HPTuners, is there a plan to look at the VATS,BCM control parts of this Holden Commodore VE model Alloytech specifically.

  7. #7
    HP Tuners Support
    (foff667)
    Bill@HPTuners's Avatar
    Join Date
    Jun 2004
    Location
    Hailing from Parts Unknown
    Posts
    28,247
    13 year old thread, no plans to add any further support for these ecm's.
    It doesn't have to be perfect, it just needs to be done in two weeks...

    A wise man once said "google it"