The security light is staying on and not allowing a startup, but then after a few tries it goes off and starts. I have the VATS setting at "None" instead of "PWM". Would that cause this problem? I set it there when I was having start issues, but found it to be a relay issue. Just never set it back. Thanks for any help.
Last edited by bluebyu8484; 11-19-2010 at 01:52 PM.
check that your vats DTC's are set to #3 no error reported.. would also help to post a tune when asking for help.
We Can Fix Your Bricked PCM Or Your YYYYYY OS ID
Turned VATS back to PWM and relinked.... seemed to work.
Reply With Quote