use 2.22
BTW, The Schematics are in AutoCad or I can PDF them.
I have been using this board for a lot of information while I have gone through the starting phase of the motor. A lot of good information from a number of knowledgeable people like yourself who are willing to help people like me when we run into trouble and I thank you for that.
I haven't seen or heard any exhaust leaks........ I was hoping the case learn would straighten it out. B2 is ~ .5 - .75 richer than bank 1. on the NGK. As I said I have the car in the garage and I have tubing over the tail pipes that I run through holes in the door. I noticed the Bank 2 was spitting sooty exhaust outside on the driveway which was why I hooked the WB up to BANK 2. I have been doing all the adjustments with the WB in the Bank 1 exhaust just beyond the collector.
I will load up 2.22 and give that a try. Will 2.22 load up a file that has been saved in Beta 2.23?
Loaded up 2.22 and after a few tries I got it to do the learn.
Thanks for your help, now I have to figure oout where the exhaust leak is on bank one. Switched WB over to B2 side and adjusted VE's
Dennis