I have had performance shift setup in my Alero for few years now. when i started autocrossing i finally realized what i set it for. i only use 2 gears through the cones so it works out very well. the actual question i have is i have raised my normal shift pressures and shift time for everyday driving, shifts are firm and solid(very enjoyable), when i flip the switch to performance mode for the track the trans is set not shift into second until i hit 43 mph and drops back to first at 39 mph, setup works excellent keeps me in the power when i need it. but i notice that the shift from first to second is slow, and soggy, shift pressure is set to 96 psi through all ranges in performance mode and shift time set at .02. how do i get the quick firm shift back in performance mode? what am i missing?