I don't know why my idle is always all jumpy. One of the reasons might be the lack of MAF screen and erradic air readings.
So I was thinking of evening out the idle range readings to one value. My idle airflow is between 3.8 and 5.3. The closes outside values are 3.58 and 5.77. I picked values that will encompass my actual values so that it won't hit anything outside during idle. Corresponding frequencies are 2125 and 2625.
I was going to stick a value in the middle like 4.68 in the cells between and including 2125 and 2625.
Is there anything wrong with doing this? It's just an attempt at a smoother idle and nothing else.