The knock sensor sensitivity on a stock 06 is 400 mV, the 07 (mine) is 129.95mV. It's the same ACDelco part#. The multipliers are a bit different. Are the 06 vcms just set to be less sensitive from factory? If so. would it be "safe" to raise it to 300 or so on my 07? I seem to log spark knock for the slightest thing. Has anyone seen/noticed this before?
I would call it "safe" I think. GM changed lots of junk on the 6.0L's such as Block/Heads/Cam combo. They also went to a better warranty so they increased the Knock Sensitivity up just to be safe on their end.
Gray Ghost- The abomination. 2007 Chevrolet Silverado CCSB. 98mm turbo, nitrous, 428LSX, Rossler 80E with a brake. Finally finished. 23 psi, no numbers, Slow as hell.
PBM G8- Aluminum 364, twin Precision 67/66 turbos, 6L90 trans swap, CTS-V/Vaporworx fuel system, slowly making progress.
Dads 2011 CTS-V- Stock bottom end, stock heads, LS9 cam, pullies, ported blower, ported TB, D3 goodies, and lots of nitrous.
618/618 motor
906/862 spray
Caterpillar 50 Forklift- Duramax swap
Reply With Quote