Firmware update won't initiate

[[email protected]]

I have the latest beta that's suppose to fix the stand alone data logging issue. Looks like in my case the firmware update doesn't fire up. I can see the pop up that says checking for firmware update but nothing happens. The current firmware that i have is Firmware: 114. My interface serial starts with 1118XXXXXX. I emailed Bill with my vcm info but just wanted to also posted it here to let you guys know through the forum as well. Because of this the error light still comes up after pushing the record button.

[Bill@HPTuners]

114 is the newest firmware, just pushing the record button doesn't do much of anything, you must actually follow the standalone datalogging programming steps.

[[email protected]]

Hehe, i did follow the instructions it just error out (flashing red light, ran out of memory), working now. Thanks.

[PitchblackC3]

How do you check the firmware version?

[[email protected]]

How do you check the firmware version?

With the interface connected to the car and the key in RUN position connect the VCM scanner->Help->VCM Info->Hit the "i" icon, it will get all the vcm info including the FW version.

[PitchblackC3]

sweet, thanks