Results 1 to 13 of 13

Thread: How Do I Attatch A File Tune, Scan Etc. When on a Post

  1. 12-31-2010 #1
    madmatt9471
    madmatt9471 is offline
    Tuner in Training
    Join Date
    Jul 2007
    Location
    Palmdale Ca 93552
    Posts
    31

    How Do I Attatch A File Tune, Scan Etc. When on a Post

    I can't seem to find it anywhere on how to do this, So...

    How do I attach a File or Scan when on a post or starting a thread?

    I know how easy it is to email, but need to do it here too!

    Thanks,Matt
    RIP - '98 LS1 Vette!
    E-MAIL - [email protected] Cell 661-406-7516

    Bolt on Mods with an A4 and 3:15's:---------322RWHP and 327RWTQ
    TFS Head,Cam,Kooks LT's,Hi-FlowCats,X-Pipe:400RWHP and 400RWTQ
    New Cam Yank 3200 Stall, 3.42's-------------423RWHP and 399RWTQ
    ProCharger P1SC 3.85" Pulley 7.6 PSI Boost:565RWHP and 483RWTQ
    Meth Injection2BAR SDTune(Est720 HP@Crank):591RWHP and 496RWTQ
    Forged 347 3.7" Pulley FlipDrive, 14.4 PSI of B@@ST 701RWHP and 582RWTQ
    Reply With Quote Reply With Quote
  2. 01-01-2011 #2
    c.u
    c.u is offline
    Advanced Tuner c.u's Avatar
    Join Date
    Jun 2010
    Location
    Eville, IN
    Posts
    282
    right click on go advanced. scroll down look for manage attachments.
    Reply With Quote Reply With Quote
  3. 01-01-2011 #3
    madmatt9471
    madmatt9471 is offline
    Tuner in Training
    Join Date
    Jul 2007
    Location
    Palmdale Ca 93552
    Posts
    31
    Quote Originally Posted by c.u View Post
    right click on go advanced. scroll down look for manage attachments.
    I am going to need just a little more direction on where I am right clicking on.

    Where it be you are speaking of?

    Thanks,Matt
    RIP - '98 LS1 Vette!
    E-MAIL - [email protected] Cell 661-406-7516

    Bolt on Mods with an A4 and 3:15's:---------322RWHP and 327RWTQ
    TFS Head,Cam,Kooks LT's,Hi-FlowCats,X-Pipe:400RWHP and 400RWTQ
    New Cam Yank 3200 Stall, 3.42's-------------423RWHP and 399RWTQ
    ProCharger P1SC 3.85" Pulley 7.6 PSI Boost:565RWHP and 483RWTQ
    Meth Injection2BAR SDTune(Est720 HP@Crank):591RWHP and 496RWTQ
    Forged 347 3.7" Pulley FlipDrive, 14.4 PSI of B@@ST 701RWHP and 582RWTQ
    Reply With Quote Reply With Quote
  4. 01-01-2011 #4
    c.u
    c.u is offline
    Advanced Tuner c.u's Avatar
    Join Date
    Jun 2010
    Location
    Eville, IN
    Posts
    282
    you have smiles and a quote so you no how to go advanced. then just scroll down.
    Reply With Quote Reply With Quote
  5. 01-01-2011 #5
    madmatt9471
    madmatt9471 is offline
    Tuner in Training
    Join Date
    Jul 2007
    Location
    Palmdale Ca 93552
    Posts
    31
    Quote Originally Posted by c.u View Post
    you have smiles and a quote so you no how to go advanced. then just scroll down.
    Ahhh! Hahhhhh! I see it now - thanks for the heads up

    Thanks,Matt
    RIP - '98 LS1 Vette!
    E-MAIL - [email protected] Cell 661-406-7516

    Bolt on Mods with an A4 and 3:15's:---------322RWHP and 327RWTQ
    TFS Head,Cam,Kooks LT's,Hi-FlowCats,X-Pipe:400RWHP and 400RWTQ
    New Cam Yank 3200 Stall, 3.42's-------------423RWHP and 399RWTQ
    ProCharger P1SC 3.85" Pulley 7.6 PSI Boost:565RWHP and 483RWTQ
    Meth Injection2BAR SDTune(Est720 HP@Crank):591RWHP and 496RWTQ
    Forged 347 3.7" Pulley FlipDrive, 14.4 PSI of B@@ST 701RWHP and 582RWTQ
    Reply With Quote Reply With Quote
  6. 01-01-2011 #6
    c.u
    c.u is offline
    Advanced Tuner c.u's Avatar
    Join Date
    Jun 2010
    Location
    Eville, IN
    Posts
    282
    happy new year.
    Reply With Quote Reply With Quote
  7. 01-13-2011 #7
    PGA2B
    PGA2B is online now
    Advanced Tuner PGA2B's Avatar
    Join Date
    Nov 2004
    Location
    St. Louis, MO
    Posts
    474
    For Some reason mine are not showing up like everyone else's? What am I doing wrong?

    http://www.hptuners.com/forum/showthread.php?t=32613
    2013 OBM A6 CTS-V Coupe
    Mods: Headers back Billy Boat Exhaust, GripTec 2.65, 8.6 PowerBond Lower, LSX Innovations Solid Isolator, ID850's, NGK TR7IX's, Accel 9070CK Wires, Spectre CAI, SRI Ported Throttle Body, SRI Catch Can, NGK AFRM, 160* T-Stat, 0fx2gv Brick, Hard Line Delete W/3/4" Lines, FB 101 FMIC, Pierberg CWA50, Stoptech Drilled/Slotted Rotors, EBC Redstuff, Cut Stock Springs, Flat Bottom Steering Wheel
    2006 Black Raven STS-V (Traded In)
    Fully Modded: 459RWHP@5888rpm/451lbft@4696rpm
    Reply With Quote Reply With Quote
  8. 01-13-2011 #8
    Bill@HPTuners
    Bill@HPTuners is offline
    HP Tuners Support
    (foff667)     Bill@HPTuners's Avatar
    Join Date
    Jun 2004
    Location
    Hailing from Parts Unknown
    Posts
    28,278
    Quote Originally Posted by PGA2B View Post
    For Some reason mine are not showing up like everyone else's? What am I doing wrong?

    http://www.hptuners.com/forum/showthread.php?t=32613
    Looks like its showing up just fine to me
    It doesn't have to be perfect, it just needs to be done in two weeks...

    A wise man once said "google it"
    Reply With Quote Reply With Quote
  9. 01-13-2011 #9
    PGA2B
    PGA2B is online now
    Advanced Tuner PGA2B's Avatar
    Join Date
    Nov 2004
    Location
    St. Louis, MO
    Posts
    474
    But everyone else's have a border around them?? So I did it ok?
    2013 OBM A6 CTS-V Coupe
    Mods: Headers back Billy Boat Exhaust, GripTec 2.65, 8.6 PowerBond Lower, LSX Innovations Solid Isolator, ID850's, NGK TR7IX's, Accel 9070CK Wires, Spectre CAI, SRI Ported Throttle Body, SRI Catch Can, NGK AFRM, 160* T-Stat, 0fx2gv Brick, Hard Line Delete W/3/4" Lines, FB 101 FMIC, Pierberg CWA50, Stoptech Drilled/Slotted Rotors, EBC Redstuff, Cut Stock Springs, Flat Bottom Steering Wheel
    2006 Black Raven STS-V (Traded In)
    Fully Modded: 459RWHP@5888rpm/451lbft@4696rpm
    Reply With Quote Reply With Quote
  10. 01-13-2011 #10
    Bill@HPTuners
    Bill@HPTuners is offline
    HP Tuners Support
    (foff667)     Bill@HPTuners's Avatar
    Join Date
    Jun 2004
    Location
    Hailing from Parts Unknown
    Posts
    28,278
    I see the border on yours
    It doesn't have to be perfect, it just needs to be done in two weeks...

    A wise man once said "google it"
    Reply With Quote Reply With Quote
  11. 01-14-2011 #11
    PGA2B
    PGA2B is online now
    Advanced Tuner PGA2B's Avatar
    Join Date
    Nov 2004
    Location
    St. Louis, MO
    Posts
    474
    Weird, maybe I just don't see it on my machine.......
    2013 OBM A6 CTS-V Coupe
    Mods: Headers back Billy Boat Exhaust, GripTec 2.65, 8.6 PowerBond Lower, LSX Innovations Solid Isolator, ID850's, NGK TR7IX's, Accel 9070CK Wires, Spectre CAI, SRI Ported Throttle Body, SRI Catch Can, NGK AFRM, 160* T-Stat, 0fx2gv Brick, Hard Line Delete W/3/4" Lines, FB 101 FMIC, Pierberg CWA50, Stoptech Drilled/Slotted Rotors, EBC Redstuff, Cut Stock Springs, Flat Bottom Steering Wheel
    2006 Black Raven STS-V (Traded In)
    Fully Modded: 459RWHP@5888rpm/451lbft@4696rpm
    Reply With Quote Reply With Quote
  12. 01-14-2011 #12
    madmatt9471
    madmatt9471 is offline
    Tuner in Training
    Join Date
    Jul 2007
    Location
    Palmdale Ca 93552
    Posts
    31
    Quote Originally Posted by PGA2B View Post
    Weird, maybe I just don't see it on my machine.......
    Yeah it looks good to me too!

    and that is a pretty dang nice looking set-up

    Thanks,matt
    RIP - '98 LS1 Vette!
    E-MAIL - [email protected] Cell 661-406-7516

    Bolt on Mods with an A4 and 3:15's:---------322RWHP and 327RWTQ
    TFS Head,Cam,Kooks LT's,Hi-FlowCats,X-Pipe:400RWHP and 400RWTQ
    New Cam Yank 3200 Stall, 3.42's-------------423RWHP and 399RWTQ
    ProCharger P1SC 3.85" Pulley 7.6 PSI Boost:565RWHP and 483RWTQ
    Meth Injection2BAR SDTune(Est720 HP@Crank):591RWHP and 496RWTQ
    Forged 347 3.7" Pulley FlipDrive, 14.4 PSI of B@@ST 701RWHP and 582RWTQ
    Reply With Quote Reply With Quote
  13. 01-14-2011 #13
    PGA2B
    PGA2B is online now
    Advanced Tuner PGA2B's Avatar
    Join Date
    Nov 2004
    Location
    St. Louis, MO
    Posts
    474
    Thanks but that is the test mule we used for mock up. Mine is Black Raven.....

    Here is a shot of her:

    2013 OBM A6 CTS-V Coupe
    Mods: Headers back Billy Boat Exhaust, GripTec 2.65, 8.6 PowerBond Lower, LSX Innovations Solid Isolator, ID850's, NGK TR7IX's, Accel 9070CK Wires, Spectre CAI, SRI Ported Throttle Body, SRI Catch Can, NGK AFRM, 160* T-Stat, 0fx2gv Brick, Hard Line Delete W/3/4" Lines, FB 101 FMIC, Pierberg CWA50, Stoptech Drilled/Slotted Rotors, EBC Redstuff, Cut Stock Springs, Flat Bottom Steering Wheel
    2006 Black Raven STS-V (Traded In)
    Fully Modded: 459RWHP@5888rpm/451lbft@4696rpm
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »