Is HPT able to tune the Chevy Cruze 1.4T engine? If so, is it an all access pass? Are there any limitations?
Is HPT able to tune the Chevy Cruze 1.4T engine? If so, is it an all access pass? Are there any limitations?
We actually need to source one of these pcm's for a couple of weeks, if you are willing to send us your pcm for some testing in exchange for some product shoot me an email to bill at hptuners.com
It doesn't have to be perfect, it just needs to be done in two weeks...
A wise man once said "google it"
While I can't send you the PCM, I am going to have access to a Cruze PCM. Is there anything I can do to help?
Andrew
2006 Duramax ECSB - Banks Monster Dual Exhaust, Tie Rod Sleeves, Kennedy Twin Deluxe Lift Pumps, Edge Insight CTS with Pryo, EGR Blocker Plate, PVC Reroute, Suncoast Stage 5 trans with 1056 triple disk converter, Cognito Steering Braces, PPE Race Valve, LML driver side exhaust manifold, AFE Boost Tube, Stock Drop-in BatMoWheel, ProFab Performance 3" Downpipe, Other mods along the way, TUNED by ME... Way too much fun
Without the pcm we cannot do much.
It doesn't have to be perfect, it just needs to be done in two weeks...
A wise man once said "google it"
Just wondering if you have scrounged up a PCM of the Cruze as of yet?
Any Others?
I thought of contacting you on this subject a while ago Bill, but are there any other pcm's you want to get a hold of. Most of us love you guysOriginally Posted by Bill@HPTuners
We actually need to source one of these pcm's for a couple of weeks, if you are willing to send us your pcm for some testing in exchange for some product shoot me an email to bill at hptuners.com
Yeah we sourced one and will start working on it shortly.
It doesn't have to be perfect, it just needs to be done in two weeks...
A wise man once said "google it"
are you guys gonna do a 1.8 tune aswell
No idea what pcm the 1.8 is using, pretty sure its different so unlikely.
It doesn't have to be perfect, it just needs to be done in two weeks...
A wise man once said "google it"
so it will never happen no tune for the 1.8 correct
I would need to see what pcm they are using...do you have a pic of one?
It doesn't have to be perfect, it just needs to be done in two weeks...
A wise man once said "google it"
umm whrs the pcm at i can get u a pic of one
Just talked to Bill about the 1.8L cruze and it will not be supported any time soon.
GM part number is 12636386 and in the following,
2011 Cadillac SRX Premium Turbo (2.8L Turbo / LP9)
2010 Cadillac SRX Premium Turbo (2.8L Turbo / LP9)
2011 Chevrolet Aveo (1.6L / LXV or LXT)
2010 Chevrolet Aveo (1.6L / LXV or LXT)
2009 Chevrolet Aveo (1.6L / LXV or LXT)
2011 Chevrolet Cruze (1.8L / LUW)
We Can Fix Your Bricked PCM Or Your YYYYYY OS ID
oo its in alot of newer cars,or is the 1.8 just not good enough
Oh no they need to figure this out. I plan on buying a sonic z-spec with the 1.4turbo and I want to tune it. I want another pocket rocket.
It would be nice I know of some Aveo guys that want a tune.
I just got a 2011 Cruze Eco 1.4L Turbo 6 speed manual. It's ready for a tune!
Last edited by Billiumss; 05-06-2011 at 01:25 PM.
2001 Camaro SS M6 - 23,xxx Miles
Huron Speed AC Turbo AC Kit - 6.0L 9.4CR, LS3 Heads, 226 232 115 lsa cam, Turbonetics 7575 1.15 AR Turbo
10.98 @ 133 MPH on 9 lbs boost
Tuning the 1.4 turbo cruse would be awesome! I was looking into this myself recently...... due to fuel prices. I've seen some dyno results from the cruse in America........ dunno what they used to tune it but gains were up around 60hpatw average with a massive improvement in torque across the entire range due to opening the throttle more.
When will tuning capability be ready for the 1.4T Cruze?
Cruze tuning will be greatly needed.
Reply With Quote
