Generation 5 camaro V6

[Phil'sC5Vette]

nothing new

[SIXXER]

after 2.24

Sorry, but just had to post on this thread.

[Phil'sC5Vette]

not yet, but ...................

[SIXXER]

Sooooo.... Any update on this, bill, Chris?

Or any updates on 2.24?

[SIXXER]

I guess no updates or nothing good since you guys go right pass this thread and the other in the v6 section.

Oh well.. I guess we will keep waiting until we go....................

[Phil'sC5Vette]

I think it will be after 2.24 is release.

[SIXXER]

I think it will be after 2.24 is release.

I wonder when that will happen, when the 6th gen camaros come out lol

[Bill@HPTuners]

The newest beta should be able to read out 2012 Camaro V6's give it a shot if you have access to it.

[Phil'sC5Vette]

is there a newer version than 2.23.410 Beta ?

If it reads, does that mean it will also make changes in the editer?

[ElecTech]

is there a newer version than 2.23.410 Beta?

Yes. There is usually an update nearly every other day. It's in the .460's now, I think.

[Bill@HPTuners]

2.23.465 was built last night and there was likely a compile at 9am this morning so could be 466 or newer now.

[Bill@HPTuners]

If it reads, does that mean it will also make changes in the editer?

No editor changes can be made until we get some of the reads sent in so we can start creating the master defs.

[DSteck]

No editor changes can be made until we get some of the reads sent in so we can start creating the master defs.

Need any other years read out? There's a V6 at the shop that's getting a V8 conversion. I could probably grab that one. I think it's a 2010 but I imagine you have plenty.

[Bill@HPTuners]

The 2012 uses the newer E39 pcm's, 2010-2011 uses an E69 derivative If I remember correctly which we currently do not support.

[SIXXER]

The 2012 uses the newer E39 pcm's, 2010-2011 uses an E69 derivative If I remember correctly which we currently do not support.

So any more info on the 10-11?

Dstek, do you have any more information on the 2010 v6 that's getting the v8 conversion?

[Asylumwarp]

Its been another month, anything new?

[Bill@HPTuners]

Nothing new.

[V84BRKFST]

So when is 2.24 even going to be done since we heard that the 10-11 v6 camaro will be worked on after 2.24

It look like you guys are currently still on 2.23 right?

[Montecarlodrag]

So when is 2.24 even going to be done since we heard that the 10-11 v6 camaro will be worked on after 2.24

It look like you guys are currently still on 2.23 right?

2.23.9999

[Phil'sC5Vette]

anything to report?