Help logging boost

[Bill@HPTuners]

I'm fine, just took a few days vacation so I didn't loose them before my "anniversary" date

4 years with hpt as of yesterday

[FIL131]

Awesome, congrats on the 4yrs

I have 3 at my job.

Glad to hear everything was ok, thought I heard somewhere that you were leaving for a while for family reasons, rumors suck.

So if I delete my cfg I wont loose my user config inputs like my wideband?

[Bill@HPTuners]

You'll loose your custom pids(I think your boost pid is causing the issue)

[FIL131]

I will give it a try, thanks again.

[FIL131]

Its reading boost just fine, delete your VCM Scanner.cfg file and then open the scanner and you will see this as well.

I deleted my config as you asked and it is still showing boost where I had vacuum and very high boost where I was only at 1-3psi. the whole scan I only went up to about 3.xpsi on my guage.

Any other info?

I can email you my .hpt if that helps as well.

[Bill@HPTuners]

Thats the only file that would affect it, if its still reading off I have no idea what the issue is because it reads fine for me.