This pops up on my Camaro during a cold start. Along with P0300. The car has a Procharger F1C and long tube headers. Any ideas as to why it does this only on a cold start?
This pops up on my Camaro during a cold start. Along with P0300. The car has a Procharger F1C and long tube headers. Any ideas as to why it does this only on a cold start?
Lifting, lowering, bolt on performance for any vehicle. In house CNC services. Turn key Sand Rails, Quads, ATV, UTV. Wheels and Tires.
Dynojet 424LC and 250IX Certified Tuning Center
335 Kietzke Lane, Reno, NV. 89502
P: 775.327.4400 - F: 775.327.4401 - Email: [email protected]
p0300 code will cause the traction/stabilitrac light to come on,,, fix the p0300 misfire issue and the traction light will stay off
2010 camaro L99, Magnacharger TVS 2300, 415ci LS3,Kooks long tubes, yank ss3200, 3.73 rear
I have the same problem with my 2011 cts-v ... sometimes when i rev it ... it turns on.... sometimes when i down shift and nail it ... it turns on.... even when the traction is completly off it will turn it back on along with stabilitrac
Ive been slowly adjusting the Revolution mode table up by 50rpm. So far today the P0300 code has not come back.
Lifting, lowering, bolt on performance for any vehicle. In house CNC services. Turn key Sand Rails, Quads, ATV, UTV. Wheels and Tires.
Dynojet 424LC and 250IX Certified Tuning Center
335 Kietzke Lane, Reno, NV. 89502
P: 775.327.4400 - F: 775.327.4401 - Email: [email protected]