I have a LM2 wideband and am trying to set it up for data logging. Should i buy the analog cable and wire it into the green plug on the interface or should i get the usb cable. I wasnt sure if using the usb cable would work becasue i didnt see support for a LM2 in the PID list.
http://www.innovatemotorsports.com/x...roductid=16297 "analog cable"
http://www.innovatemotorsports.com/x...9&cat=0&page=1 "usb cable"
Last edited by silverbullet08; 05-17-2011 at 02:32 PM.
HP-Unlimited Tuning and Custom Fabrication
Houston area performance parts dealer
MD800 Mustang Dyno 713-560-3889 Taylor
2016 Camaro A8 "shop car" FIRST 6th GEN CAMARO OVER 200mph IN THE MILE 203.5mph
Dang no one after a whole day!
HP-Unlimited Tuning and Custom Fabrication
Houston area performance parts dealer
MD800 Mustang Dyno 713-560-3889 Taylor
2016 Camaro A8 "shop car" FIRST 6th GEN CAMARO OVER 200mph IN THE MILE 203.5mph
LM2 is certainly supported. Youre better off creating a user defined PID for it due to the Innovates configurable range capability.
I'm not sure what you mean by the USB cable. I'm not familiar with the LM but whatever wire is the analog output goes to the HPT EIO green plug.
Bill Winters
Former owner/builder/tuner of the FarmVette
Out of the LSx tuning game
Reply With Quote