So it seems like this has never happened before and I'm trying to figure out how to go about fixing it. I am logging MAF airflow vs. Frequency and plotting my E85 AFR % Error (which is basically SENS.120/1.515) and using my injector bank 1 PWs (it's an Ecotec 4-cylinder) at anything greater than 1.0 to filter out deceleration and such. But the problem is the scanner is still plotting the error values in the MAF frequency columns even when pulsewidths are below the 1.0 msec filter. Is this an error in the scanner or something I am doing wrong? I'm using the 2.23 beta still from like 3 years ago.