I'm sick of my car smelling super rich at idle and stalling sometimes, so today I changed the following on my tune:
Set the PE enrich table to activate at 0 % throttle for 0-1200 rpms with a PE commanded AFR of 15.9.
This is the only thing I changed on the tune. I loaded it up, took the car for a test drive and noticed the following:
The commanded AFR was never above 14.7 at any time. The car died far more times than it ever had....
Any thoughts? I've attached my tune and the log. The cam is a 228/228 so nothing too big. I'm guessing its defaulting to another table that is richer? But even then...I have my OLFA table in the idle ranges set higher than 14.7. I'm guessing there is another factor involved...I just don't know what