-
Tuner in Training
Knock Box
Hi guys , I'm looking to buy a knock box , I'm wondering which one you are using .
Thanks
-
HP Tuners Owner
http://theknockbox.com.au/
This is the best and Greg is a great guy.
Chris...
-
Tuner
I'm using the phormula knock detection equipment, to be honest I find it a little hard to actually hear light knock over the dyno noise etc, but the 5 volt output connected to my dyno gives me an accurate trace of any knock events and at what rpm.
I initially spoke to Greg from the knock box about getting a 5 volt output on his gear and his thoughts were it would not happen as it was not accurate, but my testing does show that appears to work well