BA XR6 turbo too rich at idle

[Mason Lockyer]

Hello ive just started using HP software....Im tuning a 2003 ford falcon xr6 turbo.....it has 42lb injectors fitted and at idle air fuel ratio is at 11.0 to 1 ive set ive set the injector flow rate to 52lbs on the low setting and set injector flow rate to 42lbs and the high setting....what else do i need to do

Cheers
Mason Lockyer

[zc347]

You're out by quite a bit there, try setting your low slope to 76 and your high to 50. That'll get it close enough to run in closed loop. Then fine tune from there. Remember the 42lb injectors run 42lb at 2.7 bar fuel pressure, the turbo's run 4 bar.

[hiddeous]

Can you post up your tune?

[Mason Lockyer]

Hi hiddeous how do i go about posting tune up?????

[Mason Lockyer]

Thanks zc347 il give that a go

[JVK]

How did you go with those spec? Did it solve your problem?