I am trying to create a custom gauge in the SW for lambda, and I cannot seem to get the gauge to display anything but whole numbers on the dial face. I know when it is running, it will display the actual number in the gauge to whatever precision I put in the setup, but all of my digits on the gauge face say "1" rather than "0.7" or "1.3" for example. Help?
In the gauge configuration(at least in 2.23) you can change the decimal precision, not sure if 2.22 had this option.
It doesn't have to be perfect, it just needs to be done in two weeks...
A wise man once said "google it"
I have 2.23, but when I make a gauge that I want to range from 0.7 to 1.3, the face of the gauage only shows "1" for each tick mark. The decimal precision doesn't affect the numbers on the dial, but just the large numbers in the center of the gauge that are displayed during a playback or logging.
Won't work, never intended to be used in that way.
It doesn't have to be perfect, it just needs to be done in two weeks...
A wise man once said "google it"
Bummer. When logging lambda, 1 place past the decimal would be nice on the gauge face. Most others do not need a decimal. I could multiply by 10 I guess and go 7 to 13. Thanks.
Reply With Quote