Page 1 of 5 12345 LastLast
Results 1 to 20 of 84

Thread: Demo Software

  1. #1
    HP Tuners Support
    (foff667)
    Bill@HPTuners's Avatar
    Join Date
    Jun 2004
    Location
    Hailing from Parts Unknown
    Posts
    28,480

    Demo Software

    You can download our demo software here:

    http://files.hptuners.com/VCM%20Suite/VCM%20Suite.msi

    The Logs & tunes folder included in the installer has multiple tunes that you can view in the software.

    Thanks,
    Bill
    Last edited by Bill@HPTuners; 08-08-2013 at 11:14 AM.
    You can open a support ticket here https://support.hptuners.com/

  2. #2
    can't get the demo to work, keep getting these error messages.
    unable to open file
    file failed validation check

  3. #3
    HP Tuners Support
    (foff667)
    Bill@HPTuners's Avatar
    Join Date
    Jun 2004
    Location
    Hailing from Parts Unknown
    Posts
    28,480
    Quote Originally Posted by Volumetric Deficiency View Post
    can't get the demo to work, keep getting these error messages.
    unable to open file
    file failed validation check
    Just tested and the link and software downloads/installs fine for me.
    You can open a support ticket here https://support.hptuners.com/

  4. #4
    Tuner in Training
    Join Date
    Mar 2012
    Posts
    21
    New here and trying to figure out what all the demo will elt you do. Is it a full version that has limited number of opens? Or is it limited some how? Also, where do you reccomend i get my tuning cable? Thanks, and sorry for the lame first post. I'll get over and post up some info on my swap!

  5. #5
    HP Tuners Support
    (foff667)
    Bill@HPTuners's Avatar
    Join Date
    Jun 2004
    Location
    Hailing from Parts Unknown
    Posts
    28,480
    Its the full version, just won't let you save files.

    You can purchase our software/hardware package right on our orders page www.hptuners.com
    You can open a support ticket here https://support.hptuners.com/

  6. #6
    Potential Tuner
    Join Date
    Apr 2012
    Posts
    2
    Quote Originally Posted by Volumetric Deficiency View Post
    can't get the demo to work, keep getting these error messages.
    unable to open file
    file failed validation check

    I get the same error repeatedly as well. Uninstalled and reinstalled 4 times. What a shame, my first experience with the software. Bill have you any suggestions or should I look elsewhere?

    Thanks,

    -E

  7. #7
    HP Tuners Support
    (foff667)
    Bill@HPTuners's Avatar
    Join Date
    Jun 2004
    Location
    Hailing from Parts Unknown
    Posts
    28,480
    Quote Originally Posted by Erock View Post
    I get the same error repeatedly as well. Uninstalled and reinstalled 4 times. What a shame, my first experience with the software. Bill have you any suggestions or should I look elsewhere?

    Thanks,

    -E
    Are you able to post the file? Maybe the file is corrupt.
    You can open a support ticket here https://support.hptuners.com/

  8. #8
    Potential Tuner
    Join Date
    Apr 2012
    Posts
    2
    There isn't a file to post. I downloaded the software from the link provided, and get that error on launch. The program never even opens. It's a brand spanking new install of windows as well, put together soley with the purpose of being a tune laptop as I am predominately MAC based. I downloaded it a second time after the first two installations just in case the original download was corrupt, and still the same thing on launch.
    Last edited by Erock; 04-12-2012 at 04:11 AM.

  9. #9
    HP Tuners Support
    (foff667)
    Bill@HPTuners's Avatar
    Join Date
    Jun 2004
    Location
    Hailing from Parts Unknown
    Posts
    28,480
    Unable to open file means you are trying to open a file via the software.
    You can open a support ticket here https://support.hptuners.com/

  10. #10
    Tuner in Training
    Join Date
    Apr 2012
    Posts
    10

    Post demo fails.

    When I try to open the demo editor I get this:

    "The application failed to initialize properly (0xc000013). Click on OK to terminate the application."

    fresh XP install, minimal other software.

    Please advise.

  11. #11
    HP Tuners Support
    (foff667)
    Bill@HPTuners's Avatar
    Join Date
    Jun 2004
    Location
    Hailing from Parts Unknown
    Posts
    28,480
    Try redownloading & reinstalling the software
    You can open a support ticket here https://support.hptuners.com/

  12. #12
    Tuner Engine_HP's Avatar
    Join Date
    Apr 2008
    Location
    Middle East.
    Posts
    117



    im also getting this
    Chevrolet LS1 Camaro 1999 M6



    My FQuick

  13. #13
    HP Tuners Support
    (foff667)
    Bill@HPTuners's Avatar
    Join Date
    Jun 2004
    Location
    Hailing from Parts Unknown
    Posts
    28,480
    Quote Originally Posted by Engine_HP View Post



    im also getting this
    Why would you need demo software, don't you already own our product engine hp?
    You can open a support ticket here https://support.hptuners.com/

  14. #14
    Tuner Engine_HP's Avatar
    Join Date
    Apr 2008
    Location
    Middle East.
    Posts
    117
    ahhh i thought these was the "how to" demo that u you have
    Chevrolet LS1 Camaro 1999 M6



    My FQuick

  15. #15
    Tuner in Training
    Join Date
    Dec 2010
    Location
    US
    Posts
    13
    works like a charm

  16. #16
    Potential Tuner
    Join Date
    Jul 2012
    Posts
    2
    I get the same error when trying to open the software.

    ""The application failed to initialize properly (0xc000013). Click on OK to terminate the application."

    Any answers for this yet? I would like to try the Demo before I purchase.

  17. #17
    HP Tuners Support
    (foff667)
    Bill@HPTuners's Avatar
    Join Date
    Jun 2004
    Location
    Hailing from Parts Unknown
    Posts
    28,480
    You could try using this link instead http:///files.hptuners.com/VCM Suite/VCM Suite (Beta).msi

    copy & paste the entire thing into your browser
    You can open a support ticket here https://support.hptuners.com/

  18. #18
    Potential Tuner
    Join Date
    Jul 2012
    Posts
    2
    ok, tried that. Still same error

  19. #19
    HP Tuners Support
    (foff667)
    Bill@HPTuners's Avatar
    Join Date
    Jun 2004
    Location
    Hailing from Parts Unknown
    Posts
    28,480
    Sounds like it might be a registry issue on your pc http://social.microsoft.com/Forums/e...e-d4d9a051f817 found a few threads about it so its not software specific from what I can tell.
    You can open a support ticket here https://support.hptuners.com/

  20. #20
    Potential Tuner
    Join Date
    Oct 2012
    Location
    Kansas City
    Posts
    2

    Dont work

    I havetried several times to download and keep getting error messages.