MPVI Pro Help...

[DSteck]

Something got broken in the beta, he'll look at it when he has a chance if its not fixed once the new editor code rolls out.

My heart is what's broken.

[youout]

SUCCESS!!!
I downloaded and installed the new 2.23.450 beta version and also installed .net 4.0 to be able to access the new upgrade. Re-configed the logger by clicking the "write config" button in the MPVI data logger menu. Then I connected laptop and all to the vehicle for it to read the VCM info, then unplugged it from the laptop and vehicle. I then plugged in the MPVI data logger by itself and hit the "record button for about a second and walla...it started to record! Hit the "stop" button for about a second also and it stopped recording. I checked everything by plugging it back into the laptop and downloading the logs and everything seems to be there.

Hope this helps, think the new upgrade from 2.23.216 to the 2.23.450 fixed this particular issue for me.

please direct me to where I can locate the update and the .net40. finding clear information on this issue is not an easy task.

[Bill@HPTuners]

please direct me to where I can locate the update and the .net40. finding clear information on this issue is not an easy task.

http://www.hptuners.com/forum/showth...560#post252560

Stickies are good