Results 1 to 8 of 8

Thread: Can someone look at my tune and help a noob..

  1. #1
    Tuner in Training
    Join Date
    Aug 2011
    Location
    PA
    Posts
    15

    Can someone look at my tune and help a noob..

    Hey guys,

    im new to tuning using hptuners.

    i had a friend help me get a quick tune in my car after the cam and headers. but it seems like its still real rich, and it has a stalling issue when the outside temp is under 45*. almost every time the clutch is pushed in and coming to a stop, or cruising at a steady speed (like on the highway) and as you come to or slow down (as taking the off ramp) the idle will drop low to around 300rpms and then hunt to idle, 80% of the time it will stall. but if the outside temp is over 45* it does this about 35% of the time. every time ive tried to log the stalling issue, it never happens. but as soon as i shut down the laptop and put it away and drive, it will usually do it. haha.

    car is an 04 gto
    mods are
    comp xer273hr114 224/230 114lsa cam
    kooks long tubes
    catless mids
    stock cat back
    k&n cai
    6spd

    if you guys could look at my tune and the log file and help me in a direction that would be much appreciated.

    the tune was done using the narrow bands. along with the logs.
    i would like to tune it with my wideband, i just havent removed it from my chevelle.

    thanks

    aaron
    71 chevelle- 6.0, HCI, t56, 411

  2. #2
    Tuner in Training
    Join Date
    Aug 2011
    Location
    PA
    Posts
    15
    Anyone make a suggestion? Lol

    Aaron
    71 chevelle- 6.0, HCI, t56, 411

  3. #3
    Advanced Tuner printmanjackson's Avatar
    Join Date
    Nov 2009
    Location
    USA
    Posts
    412
    ok, get a WB on it then get the tune right first
    '02 Corvette
    LS6, MN6, LT's/X pipe and TI's, Honker CAI, AI 243 heads, PatG Custom Cam, FAST 102, LS2 TB, Red Top inj, HPTuners & NGK/AFX

  4. #4
    Tuner in Training
    Join Date
    Aug 2011
    Location
    PA
    Posts
    15
    In which direction should I now go in with a wideband?
    Try to get the lt/stft in line, then ve and pe?
    Should we have just used the wb from the beginning?

    Thanks

    Aaron
    71 chevelle- 6.0, HCI, t56, 411

  5. #5
    Go the wideband mate, only way to do it imo.
    Disable the stft, ltft's and tune the VE with the wideband for starters.

    Cheers
    Benno

  6. #6
    Advanced Tuner printmanjackson's Avatar
    Join Date
    Nov 2009
    Location
    USA
    Posts
    412
    here is a good starting place http://ls1tuningguide.com/tuninghelpfiles.php
    '02 Corvette
    LS6, MN6, LT's/X pipe and TI's, Honker CAI, AI 243 heads, PatG Custom Cam, FAST 102, LS2 TB, Red Top inj, HPTuners & NGK/AFX

  7. #7
    I tried to email, you have it disabled.

    How are you making out with this?

  8. #8
    Tuner in Training
    Join Date
    Aug 2011
    Location
    PA
    Posts
    15
    That's odd I'll go back and make sure it's not disabled.

    Email is [email protected]

    I haven't had time to touch it since I posted. I keep reading up on what to do to better inform myself. But that's about it.

    Thanks

    Aaron
    71 chevelle- 6.0, HCI, t56, 411