not getting right g/cyl reading left axis

[Baezi z06]

Hi

my computer crashed last year and i lost all of my data and did need to set it all up again
now i'm starting tuning again, i got the new Beta version again and everything seems to work but when i set up Main spark and KR tables in the scanner i'm not getting the right readings in the table (left axis) i'm logging g/cyl but i´m only getting hole numers from 8 up to 136 not 0,008 to 0,136 like it should

so all loggings go only in the top column 8 on the left axis but the rpms are right readings
i´m missing something here i know

i have the PC set for English US

what can this be, it all worked great before crash....

thanks
Baezi

[Baezi z06]

here is a config

se main spark table (timing Advance)

[Baezi z06]

No one....

the car logs the g/cyl right but when in the table it´s in hole numbers although i try to build the table my self cylindair airmass comes up in hole numbers not whith comma like it should

thanks
Baezi

[Baezi z06]

No one in the same boat here....

i´m thinking if it could be something related to framework or some drivers kind of problem

Baezi

[Bill@HPTuners]

Likely something to do with u using , instead Of .

[Baezi z06]

Likely something to do with u using , instead Of .

Hi Bill

don´t understand you sorry

U vs Of what´s that ?

thanks for replying

Baezi

[longboxdime]

He is saying maybe you added a comma in your data instead of a period like in post#1 or something simple like that.