Results 1 to 3 of 3

Thread: engine and tranny swap

  1. #1

    engine and tranny swap

    I swapped a 2000 yukon 5.3 engine with a 2000 4l60e(tranny is a low mileage from a 4.3 V6 S10). It shifts fine at normal throttle but at WOT it will free REVs in third. Also it revs to high in 1 and 2 before shifting. I did adjust the gear ratio and tire size in hptuners. The VSS speed is dead on as well. I will upload the file when i can get it from my friend. The tune is all stock except the gear and tire change. Any ideas?

  2. #2
    Advanced Tuner
    Join Date
    Mar 2011
    Posts
    384
    Did u check fluid level?
    My setup is a 356ci with a 260/268 (212/218 at .050 lift) duration cam with aluminium corvette heads and flat top pistons running 11.3 comp. ratio. with tuned port injection and vortec crank pick up and dizzy running a 411 pcm and 60lb bosch injectors, 1.6 ratio roller rockers. For transmission its a 4l65e built with the monster in a box mega ss kit. All in a 92 chevy ext cab 4x4 pickup with a 98 cab now installed with a third door! running only e85

  3. #3
    Yep, tranny level is good to go.