Trying to get LM-1 working

[02Z0h6]

Hooked up my LM-1 tonight and noticed my display reading 14.6 but my log reading 13.1. Do I have to configure Input #1 or is it ready to go as is? I have the red wire from the LM-1 to the white of the EIO and the ground from the LM-1 to the black on the EIO. Thanks guys.

[edgZ06]

Yes you have to configure input 1.

Open your table display and right click the box below Air Intake Temp. Then left click on the insert box. Now you will see your Aux. List, click on the + sign to the left of Wideband and a drop down list will appear. LM-1 is the first option, click on that one and it will be inserted into your table.

[02Z0h6]

I have the LM-1 in my table but the readings are different. I'm seeing 14.6 on the display and 13.1 on my laptop in HPtuners. Thanks, Chad.

[edgZ06]

Did you configure the LM-1 in logworks?

[02Z0h6]

That was the problem edge. It's much closer now but still not exact. 12.4 on LM-1 and 12.6 on the histo.