Here is the project that I have been using my HPT package for:
Eaton M90 blower from a '92 supercoupe, 80lb Semiens injectors, FMIC, running a blower through MAF and dynamic airflow cut off at 3900rpm. Also using a GM 2bar from an Ion Redline. its been a fun adventure. I need to get a smaller belt as well, slipping past 5k
http://youtu.be/R31Xz2Pj9Io
I would love to see pics of the M90 adapter. Or is it mounted to the LIM?
1997 Black Curse SEi, 4th Engine, 2nd trans.
2000 Chevrolet Blazer LT 4.3L
2002 Chevrolet S-10 LS 5.7L
she is mounted to a beefy bracket I made that is on hte exhaust side of the engine. It was a one off :-)Originally Posted by Mike1995
here is the modified coolout outlet and idler pulley bracket I made that attatches above the p/s pump.
here is the S/C bracket, all 1/4" bar plate. everything was powdercoated after finished. It attatches to on of the engine mount bolts, 2 accessory bolts(with spacers) and the side of the head
Reply With Quote