anyone have any problems with the ign cycle timing out?
anyone have any problems with the ign cycle timing out?
LSX AM 444
Runner up in points 2011
3rd in points 2012
8.14@166 all motor
Driver/ Tuner car 414 Texas mile 263.2mph
I've only ever seen issues on vehicles we don't support.
It doesn't have to be perfect, it just needs to be done in two weeks...
A wise man once said "google it"
It does flash but it takes a lot of tries and it read it out correctly with no issues. it is a 05 mustang
LSX AM 444
Runner up in points 2011
3rd in points 2012
8.14@166 all motor
Driver/ Tuner car 414 Texas mile 263.2mph
i see often with the ford trucks, some times i just reboot the laptop and it takes right away (windows 7) im not on the latest beta buy fairly new (laptop not with me at work)
97 k2500 ecsb 5.7l/4l80/4x4 0411 pcm,thorley tri-y's,true duals(no cats),msd ign.,zz4 cam, tuned with efi live
Ford trucks need a very good battery voltage to flash without problems
9 sec Montecarlo SS
I have seen problems on my car as well, 2006 Mustang.
It seems like it's going to work, gets about 70% finished writing, and then fails.
After that I get ignition cycle problems for at least the next 4-5 tries. It ends up working eventually, but it takes a lot of tries.
EDIT: It seems if I drive the car for a good 15 minutes before flashing, to make sure the battery voltage is high, I don't have any problems.
Last edited by Tiron; 01-14-2013 at 06:21 PM.
Reply With Quote