What command pe mode???

[racerx203]

I'm having problems with afr command when i go into boost. There are two paramters that enable PE mode correct??? First one is TPS i have mine set to 20% at all rpm's and the second is map enable PE mode i set mine to 100kpa. Help if this is wrong to enable PE mode??? Because this is doing nothing for me. The only way to get into PE mode is at 100% TP. I'm i doing something wrong??? I'm on a mac give me a couple mins and i'll download tune. Attachment 39702Attachment 39703mode2.hpl

[mowton]

Boost Enrichment EQ ratio vs MAP is set to all 1.0's (Stoich)....set to 1.25 or what ever you want the AFR to be over 100 kPa.

Ed M

[racerx203]

Thankyou, Doesn't PE mode go to the richer PE mode first???? I have my troddle position at 20% 1.33 shouldn't that over rule the 1.00 in EQ ratio map???? I'm just trying to understand this stuff. Thx again. I will change to 1.33 EQ ratio map.

[realcanuk]

I have boost enrichment disabled and go off PE only. It definitely should work. My understanding is if you have both set it will use the richer of the two.

[DSteck]

Use 5% throttle.