Results 1 to 4 of 4

Thread: new cam dead spot

  1. 12-20-2023 #1
    bradley029
    bradley029 is offline
    Tuner in Training
    Join Date
    Dec 2023
    Posts
    15

    Question new cam dead spot

    hello all new to the forum hope someone can get me on the right track so heres my setup
    2021 ss 1le btr220 cam, ls7 lifters ,btr spring kit ,msd atomic intake,1 7/8 LTH,3"catless ss exhaust,k&n blackhawk cai,msd 2 step
    the car fires rite up and idles good at 750 rpm but from idle to about 2000 rpm it wants to slightly stumple before running smoothunless even if i ease into it
    i have the mpvi3 and an aem wide band afr is spot on at wot
    any guidance wuold be great thank you
    Reply With Quote Reply With Quote
  2. 12-20-2023 #2
    TriPinTaZ
    TriPinTaZ is offline
    Senior Tuner
    Join Date
    May 2003
    Location
    South FL
    Posts
    1,368
    Who tuned the car? Torque Based ECU's are no cake walk.
    [email protected]
    Owner/GM Calibrator
    Gen V Specialist - C7 Corvette, Gen6 Camaro & CTS-V3
    Reply With Quote Reply With Quote
  3. 12-21-2023 #3
    bradley029
    bradley029 is offline
    Tuner in Training
    Join Date
    Dec 2023
    Posts
    15
    im tuning it myself the only issue i have is the little dead spot at tip in
    thank you for any input
    Reply With Quote Reply With Quote
  4. 12-21-2023 #4
    TriPinTaZ
    TriPinTaZ is offline
    Senior Tuner
    Join Date
    May 2003
    Location
    South FL
    Posts
    1,368
    If you want help you need to post the tune and the log.
    [email protected]
    Owner/GM Calibrator
    Gen V Specialist - C7 Corvette, Gen6 Camaro & CTS-V3
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »