Commanded Lamba

[reactor2]

Since custom PIDs do not work in version 2.24.57 of the VCM Scanner I am unable to create a user defined PID to capture commanded lamba. I'd like to use a function [PID.6001]/14.63 but in version 2.24.57 of the VCM Scanner software this will, of course, not work (infamos hp tuners <unsupported parameter> error). While hp tuners is fixing this bug, is there a work around for this that does not use user defined PIDs?

[reactor2]

Figured it out. This will save you A LOT of time:

Whenever you create a custom PID make sure you scanning the variables you are referencing in the custom PID AND make sure they are in order (I would say its a bug but it is what it is). So in my example above "Commanded Air Fuel Ratio hi res" ([PID.6001]) must appear before my user defined PID (Commanded_Lambda):

Commanded Air Fuel Ratio Hi Res <-Build in PID
Commanded_Lambda <-User defined PID