im tuning my shift points and im trying to get 2nd gear to pull to 6600-6700 with a firm 3rd gear shift, but as im slowly changing the shift points 2nd gear pulls to 6500 and the 3rd gear shift felt late... sometimes it hits the limiter, im wondering if i missed a table or if its the shift kit thats installed in the trans just wanting to shift where it wants. i would post a tune but i have a old hptuners serial cable and alot of you wont be able to view the tune. car is a 98 camaro z28 with a cammed 5.3 200 shot of nitrous on occasion built 4l60e rated for 750 3k stall converter. currently i have the tune where it shifts hard into 2nd and firm into 3rd at w.o.t. shifting around 6300 rpms, and cruising it shifts so smooth you almost cant feel 3rd and 4th, then the converter locks up hard almost like a 5th gear (per my tune settings).