Page 9 of 10 FirstFirst ... 5678910 LastLast
Results 161 to 180 of 192

Thread: Bluecat Transmission Table Software

  1. #161
    Potential Tuner
    Join Date
    Jun 2019
    Posts
    1
    can some one email it to me at turbodac@gmail.com

  2. #162
    Tuner in Training
    Join Date
    Oct 2011
    Location
    South Jersey
    Posts
    12
    I don't want to sound naive but I am. I've downloaded the software but don't know why I would use it or manipulate it. It's easy enough to make the changes but I'm not exactly sure what I'm doing. I have a 4l60e with a circle D 3400 stall with triple billet clutch. I'm not totally satisfied with the way it acts. It's great when you are accelerating but during normal driving it feels sloppy and non responsive. This is in a 2000 Camaro SS A4 with 3.23 rear. Any suggestions as to what would make this car feel better are greatly appreciated

  3. #163
    Tuner in Training
    Join Date
    Oct 2011
    Location
    South Jersey
    Posts
    12
    I don't want to sound naive but I am. I've downloaded the software but don't know why I would use it or manipulate it. It's easy enough to make the changes but I'm not exactly sure what I'm doing. I have a 4l60e with a circle D 3400 stall with triple billet clutch. I'm not totally satisfied with the way it acts. It's great when you are accelerating but during normal driving it feels sloppy and non responsive. This is in a 2000 Camaro SS A4 with 3.23 rear. Any suggestions as to what would make this car feel better are greatly appreciated . I should mention that this car has a D1SC Procharger and with a very conservative tune cranks 450 on a Dynojet

  4. #164
    Tuner in Training
    Join Date
    May 2019
    Posts
    21
    Being new to the tuning world I've been tuning my trans for a few days now, I was working on the TCC lockup timing as it would stack the 4th and TCC lockup at around 40 mph then unlock instantly. Was doing some research on here and stumbled across this thread so I downloaded the program "BlueCat" and watched a couple videos on how to set it up and off I went. I input the needed info and copied the tables as they were set in the program. All I can say is WOW, what a difference this makes, now the truck feels like it should (like I like it) and it doesn't stack 4th and the TCC lockup. Thank you very much for sharing this with us and the time you put in to set it up.

    Neal

  5. #165
    Tuner in Training
    Join Date
    Oct 2011
    Location
    South Jersey
    Posts
    12
    What type of auto in your truck?

  6. #166
    Tuner in Training
    Join Date
    May 2019
    Posts
    21
    4L60e

  7. #167
    Tuner in Training
    Join Date
    Oct 2011
    Location
    South Jersey
    Posts
    12
    Was there a mapping for the 4l60e?

  8. #168
    Tuner in Training
    Join Date
    May 2019
    Posts
    21
    sorry not sure what you mean by mapping for the 4l60e

    Neal

  9. #169
    Potential Tuner
    Join Date
    Aug 2017
    Posts
    6
    Quote Originally Posted by chumbini View Post
    Was there a mapping for the 4l60e?
    yes there is.. 60/65/70e

  10. #170
    Tuner in Training
    Join Date
    Oct 2011
    Location
    South Jersey
    Posts
    12
    Thank you. Yes I found the mapping for a 4l60e. I made a few changes since I have a triple billet clutch in my circle D converter.

  11. #171
    Hello!

    Download is restricted to US, and i dont get around it, is there anyplace else it could be downloaded from? / Mats sweden

  12. #172
    Tuner
    Join Date
    Aug 2016
    Location
    Swansea Wales UK
    Posts
    123
    Mats send me your email addy by PM, I'm in the UK and it should send through yahoo or similar, john
    Gen3 L59/4L60E LS3 cast manifolds, Small Cam change, 2800 Convertor, MPVI, using MTX-L for wideband tuning

  13. #173
    Tuner in Training
    Join Date
    May 2008
    Posts
    38
    8L90E - does anyone know why we don't see anything under Export tables ???

  14. #174
    Senior Tuner Ben Charles's Avatar
    Join Date
    Aug 2009
    Location
    Calibrating
    Posts
    2,228
    Use custom and input the gear ratios

    Email Tunes, PM me for more info
    96 TA Blown/Stroked, 4L80E/Fab 9
    15 C7 A8 H/C 2.3 Blower/PI
    14 Gen 5 Viper
    Custom Mid Engine chassis, AKA GalBen C

  15. #175
    Tuner in Training
    Join Date
    May 2008
    Posts
    38
    Quote Originally Posted by Ben Charles View Post
    Use custom and input the gear ratios
    I tried that, but i still don't see anything under "Export" >> "Export Window"
    Is there a way to add "Speedometer Cal" or "Shift Tables" ???

  16. #176
    Potential Tuner
    Join Date
    Jan 2019
    Posts
    3
    HI Guys,

    Can someone please email software to ben@ausrover.com.au.

    Thanks

  17. #177
    Tuner
    Join Date
    Aug 2016
    Location
    Swansea Wales UK
    Posts
    123
    I've sent you a copy, john
    Gen3 L59/4L60E LS3 cast manifolds, Small Cam change, 2800 Convertor, MPVI, using MTX-L for wideband tuning

  18. #178
    Potential Tuner
    Join Date
    Jul 2019
    Posts
    1
    Hi there,
    Is there any chance someone could send me a copy of the file also. Also been restricted by location. diddy.01@gmail.com
    Thanks

  19. #179
    Tuner
    Join Date
    Aug 2016
    Location
    Swansea Wales UK
    Posts
    123
    Hi, I've sent you my copy, john
    EDIT: won't send to a Gmail addy
    Last edited by jsf55; 07-16-2019 at 04:03 AM.
    Gen3 L59/4L60E LS3 cast manifolds, Small Cam change, 2800 Convertor, MPVI, using MTX-L for wideband tuning

  20. #180
    Potential Tuner
    Join Date
    Dec 2018
    Posts
    4
    Good Evening, Can someone please email to nick.zerafa@gmail.com

    Cheers in advance