Enhanced fan setting OS

[OldFartC6]

I've searched and searched but am coming up short. My question is what OS do I need to get better control of my fan settings? I think I need the 2.5 bar MAF OS with Rescaled fan temperature axis 163-250F. If this is the one I need where is it or how do I get it. All I see available in HPT editor is a 2 bar OS. Below are the specs on my car.

I did find this info but it didn't say how to get it.
http://www.hptuners.com/forum/showth...ir-Differences

[OldFartC6]

Bump - anybody? Wondering if I have to have the pro version?

[Bill@HPTuners]

Thats the one.

[OldFartC6]

Thats the one.

Which question did you answer? 2.5 bar MAF OS with Rescaled fan temperature axis 163-250F or I need the pro version?... or both?

[Bill@HPTuners]

2.5 bar OS

[OldFartC6]

Where do I get this OS?

[Bill@HPTuners]

os tab

[OldFartC6]

os tab

Not seeing it. Am I doing something wrong?
Capture.JPG

[c.u]

That`s it.

[OldFartC6]

That`s it.

Ok great!

I had the impression that it had to be the 2.5 bar OS. Could you tell me once I select the new OS will I be able to go back to the original OS if I don't like it?

Thank you!

[c.u]

Save the new 2.5 bar OS with a new name. Then you can go back to the original OS if you like. When going from one to the othere you will have to do a write entire. Here is some thing to look at.http://files.hptuners.com/support/De...alkthrough.swf

[OldFartC6]

Save the new 2.5 bar OS with a new name. Then you can go back to the original OS if you like. When going from one to the othere you will have to do a write entire. Here is some thing to look at.http://files.hptuners.com/support/De...alkthrough.swf

Thanks! I got off on the wrong foot but now the pegs are lining up so to speak. I took a look at the video and I see it's not going to be that easy for me but I will try to figure it out. Populating the VE table is going to be interesting.

Thanks again!