I'm not even certain there are any spark and fuel modifier tables in the P59 controller Gen3 PCM's but would at least like the ability to turn flex fuel on/off and select sensor/virtual types.
Same deal on the E40's.
Thanks Fellas!!
I'm not even certain there are any spark and fuel modifier tables in the P59 controller Gen3 PCM's but would at least like the ability to turn flex fuel on/off and select sensor/virtual types.
Same deal on the E40's.
Thanks Fellas!!
James Short - [email protected]
Located in Central Kentucky
ShorTuning
2020 Camaro 2SS | BTR 230 | GPI CNC Heads | MSD Intake | Rotofab | 2" LT's | Flex Fuel | 638rwhp / 540rwtq
2002 Camaro | LSX 427 | CID LS7's | Twin GT5088's | Haltech Nexus R5 | RPM TH400
I'll edit this later and add a specific OS request on the Gen3 that I need access too. I don't have the OS in front of me at this moment.
EDIT***
OS ID: 12592618
Last edited by LSxpwrdZ; 12-04-2013 at 11:44 AM.
James Short - [email protected]
Located in Central Kentucky
2020 Camaro 2SS | BTR 230 | GPI CNC Heads | MSD Intake | Rotofab | 2" LT's | Flex Fuel | 638rwhp / 540rwtq
2002 Camaro | LSX 427 | CID LS7's | Twin GT5088's | Haltech Nexus R5 | RPM TH400
I also would like more Flex tables in my E 40. Some are missing compared to other e 40's
OS ID : 12603159
THanks
I would like the timing advance tables for gen 3 flex fuel, I don't know what os since it is a segmented file. James helped with the original. (Thanks again) I am looking for a way for timing advance at higher levels of alcohol percentage.
Edit: OS 1260052 from 12587603 If that helps
Last edited by Dboy; 12-09-2013 at 07:39 PM.
Reply With Quote