HP Tuners 2.25 Beta Release(2004-06 Dodge, Jeep, Chrysler)

[Bill@HPTuners]

HP Tuners is pleased to announce our initial beta dodge release for NGC3 based 2004-2006 Dodge, Jeep & Chrysler applications this includes but is not limited to:
Dodge SRT4 Neon
Dodge Ram V6/V8 Gas
Dodge Dakota
Dodge Durango
Dodge Magnum
Dodge Charger & Charger R/T
Dodge Grand Caravan
Chrysler 300c
Chrysler Sebring
Chrysler Town & Country
Jeep Cherokee
Jeep Liberty
Jeep Wrangler

neon.JPG

To receive access to this build you will need to email support with your serial number with the subject: Dodge Beta and we'll post it to your customer page.

-HP Tuners support

[Brice]

YEAH !
Thank you !

[Brice]

2004-2006 Ram SRT10 too ?
Vipers ?
Pt Cruiser ?

[Bill@HPTuners]

2004-2006 Ram SRT10 too ?
Vipers ?
Pt Cruiser ?

04-06 cruiser maybe try reading for starters.

No viper yet
No SRT10 truck yet

[01ssreda4]

Requested mine. Gonna try it out as soon as I get it.

[XxSilentHawk99x]

Email support? I'd love to see if I can get some custom tunes for my 3.7L V6 truck...whats the email? Is it a requirement to have a wideband sensor installed?

[ElecTech]

Email support? I'd love to see if I can get some custom tunes for my 3.7L V6 truck...whats the email? Is it a requirement to have a wideband sensor installed?

This is a "tune it yourself" type of product, or else, you'll need to find a shop who can. They do not offer "tunes" for sale.

The email would be support @ hptuners .com

[XxSilentHawk99x]

This is a "tune it yourself" type of product, or else, you'll need to find a shop who can. They do not offer "tunes" for sale.

The email would be support @ hptuners .com

Understood. Thanks for the clarification.

[Brice]

looks good, congrats

Somes questions:
-what about the transmission settings ? is it on the way ?
-Do you have a road map for the other years ?

[Bill@HPTuners]

-what about the transmission settings ? is it on the way ?

depends on the application.

we support read support on the NGCX-the tcm thats inside the pcm housing. For vehicles that use a separate tcm we have no plans for those tcm's at this time.

-Do you have a road map for the other years ?

Nothing is set in stone but we already offer read support for 97+Jtec & Jtec+ pcm's and have done a good amount of work on the 08+ viper pcm's so they'll likely be the next ones out.

[RWTD]

Bill, any info to share on Gen 3 Vipers, specifically '06?

[Bill@HPTuners]

What are you looking for? I know we haven't started mapping the definitions yet so I don't know much to this point other than our software can read the pcm's.

[dsmlights]

Just played with the latest beta build. Looking great bill, I see the table issue has been fixed. I should be tuning my personal SRT this week. I will let you guys know how it goes.

[RWTD]

What are you looking for? I know we haven't started mapping the definitions yet so I don't know much to this point other than our software can read the pcm's.

Basically, you just said what I needed to know. I'll get my friend to read his 2006. Thanks!

[Bill@HPTuners]

k, James, just make sure you guys send us the file(s) so we can start mapping them.

[04blackgmc]

[jaydubb71]

I have access to an 05 or 06 SRT4. I will call the owner and see if I can read it...

[jaydubb71]

Hey... Where do you want this 2005 Neon read posted?

[VodeAn]

Really appreciate the support for these new vehicles but curious about 2007+ vehicles? Is the ECU architecture different? A customer asked me this week about doing vehicle with a powertrain from a 2007 Charger SRT8.

[Bill@HPTuners]

Yes, completely different pcm. We'll be releasing the software for 97-06 Jtec/Jtec+ pcm's before we do the 07+ NGC4 and other pcm's.