we recently added support for the T68 TCM found in late model 5 speed auto applications, for read support on these please email support with your serial number and the subject:Solstice/Sky A5 beta tester
we recently added support for the T68 TCM found in late model 5 speed auto applications, for read support on these please email support with your serial number and the subject:Solstice/Sky A5 beta tester
Last edited by Bill@HPTuners; 05-19-2014 at 08:52 AM.
It doesn't have to be perfect, it just needs to be done in two weeks...
A wise man once said "google it"
Bill email sent with SN
Tim
Any chance of support for the 5 speed auto in the 2006-2009 Equinox?
Russ Kemp
its probably the same tcm(T68) email me your serial number if you don't already have access to the beta link on your customer page Russ and I'll get it for you to try reading.
It doesn't have to be perfect, it just needs to be done in two weeks...
A wise man once said "google it"
Unfortunately not, it's an oddball Japanese-sourced Aisin TCM.Originally Posted by Bill@HPTuners
Bill, loaded, downloaded a complete file and see trans parameters. Anything special you wish for me to capture?
Any chance you could post up the file? It'd be interesting to see how these work
Bill, do not see the option for 5L40-E in the drop down on the General Tab. I see 4L60, 4L80, Manual, Non-Elec Auto, and Allison. Is this in relation only if the transmission has a "Performance Mode" and method of switch?
Last edited by thende; 05-27-2014 at 06:58 PM.
Sounds like you are using a 4 speed auto tcm, not a 5 speed.
It doesn't have to be perfect, it just needs to be done in two weeks...
A wise man once said "google it"
Thanks for the heads up caesar, you are just chock full of knowledge it seems.
It doesn't have to be perfect, it just needs to be done in two weeks...
A wise man once said "google it"
I have a 2008 Sky Redline Auto, I'm game.
2009 Sky Redline here. Email sent.
Thanks!
Bill, I have the latest Beta downloaded but it does not pull up any tables for the Trans.
Email support.
It doesn't have to be perfect, it just needs to be done in two weeks...
A wise man once said "google it"
Did you read the TCM Mike?
Everyone that has sent us in one of these files has been sent a new update with trans tables
It doesn't have to be perfect, it just needs to be done in two weeks...
A wise man once said "google it"
Email sent
Bill,
Have time to dig back into this, I do not see the Solstice GXP trans listed as stated above. Is it a stock 2007 GXP, so it should have the correct TCU.
Tim
Bill, I did not receive the update.
Again, I do not see the solstice, I installed, read the file, and I see 4Speed Auto's. I have stock 07 GXP with Auto.
Did the updated file take care of this?
Thanks,
Tim
Thanks for all of your support Bill. No more X7F failure at the end of the write calibration and my trans is shifting lightning fast. Shaved another .25 seconds off of my 60-100 times.
Reply With Quote