Alloytech ecu tuning & DTCs

[just commodores]

Hello

I am a tuner based in Napier, New Zealand.

I predominantly tune ecotech V6's and LSx V8's but am getting a lot of enquiries about Alloytech's.

I have quite a few different tuning software/hardware solutions but none of them can do Alloytechs.

I see on your website that alloytech tuning is avaliable for 3.6 L (LY7) 2005-2008, I have a couple of questions.

1) Does that cover E55 & E77 Bosch ecu's?

2) Can VATS be disabled (I have a few stockcar (speedway) customers that want to run the motors in their race cars.

3) Can individual DTC's be disabled (like in LS1) (such as P0008, P0009, P0016, P0017, P0018, P0019) They arent allowed variable valve timing, so want to lock up the cams for high rpm power only.

Cheers
Brad Roberts
Just Commodores
Napier
New Zealand.

[Bill@HPTuners]

1. Yes
2. No
3. If they are set by the PCM you can tuem them off

[just commodores]

1. Yes
2. No
3. If they are set by the PCM you can tuem them off

Excellent, thanks for prompt reply. I did PM chris but didnt hear anything

Is there an Australian or New Zealand agent for HP tuners I can get VCM suite from quickly, have an urgent job here?

[Bill@HPTuners]

http://www.vcm-suite.com.au/

[2008SRX]

1. Yes
2. No
3. If they are set by the PCM you can tuem them off

Are you sure ?
I have a 3.6 LY7 with ECM E77 and it's actually not possible to read it.
I'm waiting for the final release 2.25 because the beta i have to test give no more parameters than support gave to me before.

[THE CHAD]

http://www.vcm-suite.com.au/

BILL Is right those guys just like the fellas on here, are great to deal with and their service is fast and efficient....I order parts for customers/myself when needed and they are sent here overnight or if ordered late in arvo the next morning they arrive at your destination.....Cheers Bret ULTIMATE LSX TUNING

[alastairwall]

Hello Brad,
I know this is an old post,
Are you still a tuner in Napier NZ?
I am also in Napier NZ, could use some help if you are able to
My number is 02102704046
Thanks in advance
Alastair wall

[alastairwall]

Hello

I am a tuner based in Napier, New Zealand.

I predominantly tune ecotech V6's and LSx V8's but am getting a lot of enquiries about Alloytech's.

I have quite a few different tuning software/hardware solutions but none of them can do Alloytechs.

I see on your website that alloytech tuning is avaliable for 3.6 L (LY7) 2005-2008, I have a couple of questions.

1) Does that cover E55 & E77 Bosch ecu's?

2) Can VATS be disabled (I have a few stockcar (speedway) customers that want to run the motors in their race cars.

3) Can individual DTC's be disabled (like in LS1) (such as P0008, P0009, P0016, P0017, P0018, P0019) They arent allowed variable valve timing, so want to lock up the cams for high rpm power only.

Cheers
Brad Roberts
Just Commodores
Napier
New Zealand.

Hello Brad,
I know this is an old post,
Are you still a tuner in Napier NZ?
I am also in Napier NZ, could use some help if you are able to
My number is 02102704046
Thanks in advance
Alastair wall