Dodge Viper Gen4 & Gen5 (Venom) Support

[Bill@HPTuners]

Yes please take my 20 credit comment with a grain of salt,not trying to offend anyone. Just took me by surprise when you're use to paying $100 for the gm and ford platforms. Ive had a few viper owners inquire about tuning and when we tell them they need to buy SCT proracer software and a handheld for $700 and then pay for the tuning, we never hear from them again. I live in a very frugal/stingy area it seems like. The people around here always complain that even $300-500 for a tune is too much, yet the same people will spend thousands on parts even though the calibration is the most important part of making all the parts work. Im not sure if they think custom calibration dosent take any skill, or that dynamometers are inexpensive and cost nothing to operate. I really cant figure out the psychi. Anyhow, heres a noob question. How do you change the user level of the software? I cant find it anywhere,where do I look? I haven't had to change it in 6 years. I only remember seeing it only on a fresh install on a computer that has never had HPT on it.

Apples vs oranges, to my knowledge SCT cannot tune 08-10 viper pcm's so its not even an option. We are the only current option unless you want to purchase an aftermarket controller at 2-4x the cost of what we are charging

[Bill@HPTuners]

Additionally we will offer support for the 97-06 Vipers as well(we've already done the master definitions for these so its just a matter of adding write & licensing for them now).

[MikeOD]

You need to update the supported vehicles list on the main site!!!

[scattergun9]

Additionally we will offer support for the 97-06 Vipers as well(we've already done the master definitions for these so its just a matter of adding write & licensing for them now).

Any Idea on the credit cost of the gen2 and gen3's? We have had several inquiries. Ive used SCT advantage, and all i can say is the layout sucks. Looking forward to HP's version,has been a long time coming.

[jasond29]

yes very interested in the Gen 2 application. Will it have the same options as the LS world as far as choosing different map configurations (1 bar, 2 bar, 3 bar)?

[Bill@HPTuners]

yes very interested in the Gen 2 application. Will it have the same options as the LS world as far as choosing different map configurations (1 bar, 2 bar, 3 bar)?

We have no plans to add custom operating systems at this time.

[2002/black/ss]

couple questions i may have overlooked

1.) once i read and rewrite a gen4 and it switches to your custom OS does it have a base tune? or is it a blank tune and i have to write one?

1.) 20 credits a car will max my interface out real fast with the credit limit, any way around that?

3.) i would license 20 credit to tune a gen2 or gen4 viper in a heartbeat, but for $1000 is there any proof i can get a cammed or FI car to run well? or is it more like a gamble, as in will you guys continue to work on it till its perfect?

[Bill@HPTuners]

1.) once i read and rewrite a gen4 and it switches to your custom OS does it have a base tune? or is it a blank tune and i have to write one?

It comes with the closest stock calibration so the values are already in there for a good starting point.

2.) 20 credits a car will max my interface out real fast with the credit limit, any way around that?

There is a 999 Dodge credit limit on each interface, thats enough to tune 49 vipers, once we get to that bridge...

3.) i would license 20 credit to tune a gen2 or gen4 viper in a heartbeat, but for $1000 is there any proof i can get a cammed or FI car to run well? or is it more like a gamble, as in will you guys continue to work on it till its perfect?

There are plans to add additional tables for them but all in due time.

[dsmlights]

Anything for Gen5 I have one avail for testing

[kristopherbush]

i have a gen5 i'm dying to cam. any updates on when tuning will be available for us?

[Bill@HPTuners]

Anything for Gen5 I have one avail for testing

i have a gen5 i'm dying to cam. any updates on when tuning will be available for us?

no eta for gen 5.

I would assume gen 3 will likely come before gen 5 since we're 90% done with them already.

[jasond29]

Sorry maybe I missed it, is the gen 2 ready now? Thanks

[Bill@HPTuners]

Sorry maybe I missed it, is the gen 2 ready now? Thanks

Reading-ready, in beta.
Definitions-still in progress, we've mapped a 97, some 01 & 02's and have a 98 lined up for mapping this week so very good progress there.
Scanner-not currently available to my knowledge
Writing-Hopefully will be worked on in July if all goes well.

[Keith@HPTuners]

Gen5 has been added to the beta. Please contact support for access.

[Revolution]

My software seems to be glitching. Everytime I uncheck P2270 DTC and save and reopen its checked again? Help

[Keith@HPTuners]

Make sure you're using the latest beta. One of the initial betas had an issue with DTC's on the venom.

[Revolution]

Can you send me a link to the newest beta version please and I will try that

[Keith@HPTuners]

You have to contact support for beta.

[Revolution]

I already have the Beta you sent me and thats what I am running Keith.

[caesar]

I already have the Beta you sent me and thats what I am running Keith.

You need to go to your user page and download the latest version. You should have version 2.25.1015 or later.