another swapping from 98 pcm to 0411 thread!!!

[bewarechevette]

ok guys the more I read the more boggled my brain is getting. I am installing an 0411 pcm ( out of a 2001 tahoe) into a vehicle wired and run by a 98 computer. I was starting to look at wiring diagrams for the 01 tahoe to repin my connectors. I noticed that depending on year model an make is how the 0411 is wired. I am wanting to install a 2 bar operating system after it is up and running. Which wiring year model pinout should I follow. I know I will have to license the truck system (2 credits), can I go straight from that system to my 2 bar operating system(2 more credits). If i wire it say per 2000 camaro pinout, do I have to license the truck then license a camaro tune then go to 2 bar? Not even sure if I am making sense at this point, lol. Sorry guys NOOB here and sometimes its best to stop reading threads and just ask. Thanks for any input you may have.

[PitchblackC3]

Are you talking about the 98 LS1 computer or the 98 black box pcm?

As a reference I just switched a 97 Corvette to a 0411 from a 2001 Silverado using a 2001 Z06 tune.
I did not license the 97 PCM or tune at any point.
I already have the 2001 Silverado year model or I would have had to license the PCM.
I did license the 2001 Z06 tune to write it.