Results 1 to 7 of 7

Thread: T43 TCC apply pressure table

  1. #1
    Tuner
    Join Date
    Mar 2006
    Location
    DFW, Tx
    Posts
    156

    T43 TCC apply pressure table

    TCM OS ID - 24264923

    What are the units on the Y axis on the TCC apply pressure table? Even though I have the software set to use imperial untis, I thought it was pulling in the metric units for this table.....but it's not.




    Here's is another T43 from a 2010 CTS-V
    TCM OS ID - 24254909

    These look correct...

    Last edited by SICK WS 6; 06-07-2014 at 10:42 PM. Reason: math was wrong
    2013 ZL1 A6

  2. #2
    Tuner
    Join Date
    Mar 2006
    Location
    DFW, Tx
    Posts
    156
    So a week and nothing?
    This might not be a "bug" but I sincerely doubt that the Y axis here is remotely close to being correct....
    2013 ZL1 A6

  3. #3
    HP Tuners Support
    (foff667)
    Bill@HPTuners's Avatar
    Join Date
    Jun 2004
    Location
    Hailing from Parts Unknown
    Posts
    28,247
    email support the file and I'll have one of our engineers take a closer look.
    It doesn't have to be perfect, it just needs to be done in two weeks...

    A wise man once said "google it"

  4. #4
    Tuner
    Join Date
    Mar 2006
    Location
    DFW, Tx
    Posts
    156
    Done. Thanks Bill.
    2013 ZL1 A6

  5. #5
    HP Tuners Support
    (foff667)
    Bill@HPTuners's Avatar
    Join Date
    Jun 2004
    Location
    Hailing from Parts Unknown
    Posts
    28,247
    we finally got around to looking into this, the address is correct, looks to just be a little gm goofyness.
    It doesn't have to be perfect, it just needs to be done in two weeks...

    A wise man once said "google it"

  6. #6
    Senior Tuner
    Join Date
    Jun 2004
    Location
    Baltimore, Md
    Posts
    1,204
    Quote Originally Posted by SICK WS 6 View Post
    TCM OS ID - 24264923
    Do you have a stock file with this TCM OS or at least the trans side of things stock?
    Factory Stock 97 SS M6 13.51 @ 104.3 mph
    Stock Longblock LS1 w/ 233/238 P.S.I. Cam
    10.81 @ 126.9 Full interior, six speed on 275 radials, a decade ago

    '99 TA trunk mounted 76mm 6 Liter
    9.0s in '09 @ 153 MPH

    Turbo 5.3 Volvo 740 Wagon
    32psi and still winding out 5th on the highway somewhere

  7. #7
    Senior Tuner
    Join Date
    Jul 2020
    Location
    VIC Australia
    Posts
    1,107
    If you're still watching this thread GrannySShifting......

    Stock from a 2017 HSV (LSA + 6L90). Should be near identical to a 2013 Camaro ZL1. Has the same weird axis.
    Attached Files Attached Files