05 SRT-4 Tuned with HP Tuners

[TunedByNishan]

Got to spend some time on the dyno tuning an 05 SRT-4 Swapped Neon for a good friend of mine.

Car has:

AEM Intake
3" Catless Turbo-back Exhaust (Single Exit)
FMIC
Crower Stage 2 Cams
Stock Injectors
93 Octane

Turned out quite well although I don't think the camshafts netted any gain on the stock turbo at all.

I had no issues tuning the car with VCM Suite.

Thanks for all the continued support HP Tuners and the Dodge Engineering team.

[TunedByNishan]

Car is running great.

The biggest improvement was in part throttle driveability.

The OEM VE mapping was very off when in open loop even before the cams were installed and the car was in OEM form.

After open loop tuning, the fuel trims are only needing to correct no more than 2% and the car is getting much better gas mileage as well.

Runs flawless at WOT.

[MMGT1]

From looking at just how dam nice both of those curves look the car must feel amazing. Having your pull look like that is what everyone should aim for! I'd say you nailed it...lol