Page 1 of 27 1234511 ... LastLast
Results 1 to 20 of 523

Thread: ZF 6HP26 TCM - Now Supported in 2.25 Beta

  1. #1
    HPT Employee Eric@HPTuners's Avatar
    Join Date
    Oct 2007
    Location
    Crawfordville, FL
    Posts
    2,409

    ZF 6HP26 TCM - Now Supported in 2.25 Beta

    If you have access to one of the Australian Ford's that has this transmission, we need reads from the TCM so I can get the definitions done.

    The latest 2.25 Beta has the ability to read them. Select ZF6HP26 from the drop down, and then read it. You may get checksum errors, save the file anyway, and email it to support at hptuners dot com.
    Eric Brooks
    HP Tuners, LLC

  2. #2
    Advanced Tuner
    Join Date
    Oct 2011
    Location
    QLD, Australia
    Posts
    436
    Eric, Where is the 2.25 Beta available from? It doesn't seem to be in the Customer Log-in Section. If I email support can they send me the Beta?

  3. #3
    HPT Employee Eric@HPTuners's Avatar
    Join Date
    Oct 2007
    Location
    Crawfordville, FL
    Posts
    2,409
    Quote Originally Posted by 45T-XR View Post
    Eric, Where is the 2.25 Beta available from? It doesn't seem to be in the Customer Log-in Section. If I email support can they send me the Beta?
    Email support with your serial number, and Bill will put the link up on your customer center.
    Eric Brooks
    HP Tuners, LLC

  4. #4
    Advanced Tuner JETURBO's Avatar
    Join Date
    Feb 2013
    Posts
    519
    Yep ill throw u a few reads
    FG F6 400+RWKW .....10.9 @ 132mph.... FIRST 10sec F6 in SA ( sold )
    DYNO DYNAMICS 1200hp ...... Tuning weapon..... ( sold )
    OFFICIAL JONNY TIG INDUSTRIES SUPPLIER ..... Biggest and lightest intercoolers for B and F falcons
    SUBARU BRZ ......AVO TURBO KIT coming......soon
    VF R8 CLUBSPORT SV...... 340FWKW.....ASE BIG SINGLE KIT .....one day

  5. #5
    Advanced Tuner
    Join Date
    Feb 2010
    Location
    Perth Australia
    Posts
    480
    7rf5z.jpg


    Emailled!
    04 Velocity MKII M6 & 06 BF F6 555 ZF6

  6. #6
    Tuner
    Join Date
    Jan 2014
    Location
    Melbourne
    Posts
    133
    Email sent

  7. #7
    Tuner
    Join Date
    Sep 2013
    Location
    Sydney
    Posts
    123
    I requested the beta, bill said it's on my profile, (I could be over excited and can't see the link), but where should I be looking to download it?

  8. #8
    Advanced Tuner
    Join Date
    Oct 2011
    Location
    QLD, Australia
    Posts
    436
    I havent found mine either. Im wondering if takes the place of the normal 2.24 beta? ive just downloaded the 2.24 beta and will go see if it will read. let you know shortly

  9. #9
    Advanced Tuner
    Join Date
    Oct 2011
    Location
    QLD, Australia
    Posts
    436
    Nope didn't work

  10. #10
    Tuner
    Join Date
    Sep 2013
    Location
    Sydney
    Posts
    123
    I havnt had a Beta before, so I have no idea, I clicked on "download the current Build" but it's not the beta

  11. #11
    Advanced Tuner
    Join Date
    Oct 2011
    Location
    QLD, Australia
    Posts
    436
    That is for the 2.24 beta mate.

  12. #12
    Advanced Tuner
    Join Date
    Dec 2009
    Location
    Bayside, Melbourne, Victoria
    Posts
    301
    NO you have to use the 2.25 Beta, 2.24 is full release not Beta!

    But in your customer login page (different to where forum is) you should see the 2.25 beta download link under the 2.24 link, both updated daily written underneath them!

  13. #13
    Advanced Tuner
    Join Date
    Oct 2011
    Location
    QLD, Australia
    Posts
    436
    Sounds like both of ours haven't been added. Or atleast just mine lol

  14. #14
    Tuner
    Join Date
    Sep 2013
    Location
    Sydney
    Posts
    123
    Mines definitely not there either

  15. #15
    Tuner
    Join Date
    Jan 2014
    Location
    Melbourne
    Posts
    133
    They still have a couple of hours until they start work
    Maybe we will have it tomorrow

  16. #16
    Tuner
    Join Date
    Sep 2013
    Location
    Sydney
    Posts
    123
    All sorted, it was my mistake, I gave Eric the wrong device number
    22minutes for a read! must be a lot of information!

  17. #17
    HPT Employee Eric@HPTuners's Avatar
    Join Date
    Oct 2007
    Location
    Crawfordville, FL
    Posts
    2,409
    Quote Originally Posted by Peppy_t View Post
    All sorted, it was my mistake, I gave Eric the wrong device number
    22minutes for a read! must be a lot of information!
    That is reading everything from the TCM. We are probably going to cut it down to just the calibration area, so it will read and write MUCH faster.
    Eric Brooks
    HP Tuners, LLC

  18. #18
    Advanced Tuner
    Join Date
    Oct 2011
    Location
    QLD, Australia
    Posts
    436
    Bill has added mine overnight, doing a read as we speak.

  19. #19
    Advanced Tuner
    Join Date
    Feb 2010
    Location
    Perth Australia
    Posts
    480
    I also have the 2.25 beta required. I'll power my F6 up tonight and grab the file.

    HPT Support prepare yo inbox!
    04 Velocity MKII M6 & 06 BF F6 555 ZF6

  20. #20
    Advanced Tuner
    Join Date
    Oct 2011
    Location
    QLD, Australia
    Posts
    436
    Mine's sent!!