I was attempting to get my VE dialed in a couple days ago using Bluecat's tool. I disabled MAF and went for a drive to log data. I soon noticed that there was no PE kicking in. Do I have to adjust VE rich in the higher kPa range when SD tuning or do I have something set wrong?
I already overwrote my tune where MAF was disabled, but here's my log file. PE works fine with MAF enabled. Look at area beginning around frame 19,000.
7-14 scan no maf.hpl
2012 Colorado 5.3
Magnum 70mm turbo
RevMax 2800 stall converter
DevilsOwn meth
This is a good guide, likely clear up some questions.
http://michigansnowmobiler.com/hptun...ons%20rev2.pdf
2016 Silverado CCSB 5.3/6L80e, not as slow but still heavy.
If you don't post your tune and logs when you have questions you aren't helping yourself.
Reply With Quote