Dodge/Chrysler/Jeep VCM Suite 3.0+ Vehicle Supported List

[xrelapse13]

2013/2014 Models Now Supported!

This is awesome! Great work guys, really appreciate the quick support on everything. Does this include transmission tuning as well? I have a customer with a 2014 Ram 1500 coming up very soon.

[Mark@HPTuners]

This is awesome! Great work guys, really appreciate the quick support on everything. Does this include transmission tuning as well? I have a customer with a 2014 Ram 1500 coming up very soon.

Not yet

[MustangGT]

Hi, do you have support for this 05094691AG is from a 2006 PT Cruiser

regards

[dodge3/5]

Not yet

Is there any transmission tuning for the 04 to o7 year ram trucks yet?

[raisi]

Do u support shift points for dodge charger R/T 2011 and if not when will u support approximately..
Thanks

[caesar]

I would like to do a CNG conversion on a friend's Dart. Possible?

[Mark@HPTuners]

Hi, do you have support for this 05094691AG is from a 2006 PT Cruiser

regards

The best thing to do is try and read it (as a NGC3) and if at the end you get the "Definition Fails to Load" send the file to support so we can map it out.

[Mark@HPTuners]

Do u support shift points for dodge charger R/T 2011 and if not when will u support approximately..
Thanks

Not yet, and no ETA. Still working on supporting engine parameters for later model Chrysler vehicles before we look at transmissions

[FastEddy]

But what about the hellcat doe? lol

[maxchevy2004]

Is the 2014 5.7 Ram 1500 covered is it US Models only?

[Engineer@HPT]

Is the 2014 5.7 Ram 1500 covered is it US Models only?

All should be covered. If export model and the VCM Editor doesn't identify it for you, try reading it as a GPEC2A first. If that fails, read as GPEC2.

[RAKAN612]

What about 2010 charger 5.7, is it full sported in 2.25 Beta ??

is transmissions open for adjustment ( revlimt , shift point ) ?

[Mark@HPTuners]

What about 2010 charger 5.7, is it full sported in 2.25 Beta ??

is transmissions open for adjustment ( revlimt , shift point ) ?

Engine is supported, transmission is not yet.

[TheViking]

Any plans on supporting the 2015 HD 6.4 Hemi?

[krzy_z2013]

i have a customer doin a 03 ram hemi will this system support it

[gfolsom]

I get that the engine parameters are vital and the transmissions will eventually come to play. That said, when you start the trans work, could you please keep the list active here like you are doing with the engine list?
Also, if we own 2.25 now, what is the process/cost to upgrade versions when trans control is added for our particular vehicles.
Thanks

[Mark@HPTuners]

Any plans on supporting the 2015 HD 6.4 Hemi?

It will be looked into

[Mark@HPTuners]

i have a customer doin a 03 ram hemi will this system support it

Not yet, it uses a JTEC which can currently only be read. It is on our short list of things to finish soon.

[Mark@HPTuners]

I get that the engine parameters are vital and the transmissions will eventually come to play. That said, when you start the trans work, could you please keep the list active here like you are doing with the engine list?
Also, if we own 2.25 now, what is the process/cost to upgrade versions when trans control is added for our particular vehicles.
Thanks

Yes, I plan on creating a thread just like this as more TCMs get added. There is no extra cost to tune transmissions if you have the vehicle licensed

[SOUTHERNHOTROD]

We could REALLY use TCM support for NAG1 and 8HP... Keep up the great work!!!