Dodge/Chrysler/Jeep VCM Suite 3.0+ Vehicle Supported List

[GM COBALT SC SS]

yep, ngc4

[Mark@HPTuners]

yep, ngc4

Send the file into support if you'd like. I'd be curious to check it out.

[GM COBALT SC SS]

Alright man. Will do when I get home.

[SOUTHERNHOTROD]

we have proven internally we can tune the EGS42/43 controllers, we are still planning how to deploy this within our software as it is a little more complex than our usual TCM support.

Any news?

[Mark@HPTuners]

Any news?

Development is in progress. No ETA yet though. I'll make sure to post an announcement if we need testing or it is ready to go.

[doc350]

Ran into an issue this morning trying to flash a 2014 Challenger SRT8. Got a "Controller Init: Failed" error. Car has a GPEC2 controller so it should be supported.

I was able to read the file with no issues and I emailed support about it this morning too FWIW.

[doc350]

Just an update, Bill and the guys in support tool care of me on this right away. Thanks a ton guys!

[xrelapse13]

Hopefully will have support soon for the Ram SRT10s?

[maxchevy2004]

Do we need to send in PCM to Tune a 2016 Dodge Ram 5.7?

[Bill@HPTuners]

Do we need to send in PCM to Tune a 2016 Dodge Ram 5.7?

Yes, we've try to state this as clearly as possible on our supported vehicle page http://www.hptuners.com/products/vcmsuite_vehicles.php

[uarperformance]

Hey Guys just to make sure 2015 Grand Cherokees SRTs are good to go on computer mod and flashing. I seen it on this page but verifying before I sell job

[Bill@HPTuners]

If its on the supported vehicles page we're confident its supported.

[Scottyb_288]

srt4 cold start.hpl

Any update on NON-CAN NGC3 srt4 pids? Ive logged with 2.24 and 2.25 and seem to have the same 7-8 pids on both. If im missing something please let me know. log posted was with 2.25 scanner.

[uarperformance]

If its on the supported vehicles page we're confident its supported.

Thanks!

[SOUTHERNHOTROD]

We are often asked what Dodge/Chrysler/Jeep models/years are currently supported in the latest beta so I decided to create this thread to keep everyone updated.

HP Tuners is pleased to have beta Dodge support for NGC3 based 2004-2006, NGC4 Based 2007-2010, NGC4A based 2011-2013, GPEC2 based 2011-2016, 29Bit GPEC2 based 2013-2016, and GPEC2A based 2014-2016 Dodge, Jeep, Chrysler & RAM applications.

This includes but is not limited to:

05-16* Chrysler 300/300C (all trims including SRT8)
07-09 Chrysler Aspen
05 Chrysler PT Cruiser GT (2.4L turbo)
05-06 Chrysler Pacifica
04-10 Chrysler Sebring
05-15* Chrysler Town & Country
08-14 Dodge Avenger
07-10 Dodge Caliber
08-09 Dodge Caliber SRT4
05-15* Dodge Caravan
08-16* Dodge Challenger (all trims including SRT8)
15-16* Dodge Challenger Hellcat
06-16* Dodge Charger (all trims including SRT8)
15-16* Dodge Charger Hellcat
04-11 Dodge Dakota
13-14 Dodge Dart (2.0L ONLY)
04-16 Dodge Durango
09-14 Dodge Journey
05-08 Dodge Magnum (all trims including SRT8)
07-12 Dodge Nitro
04-05 Dodge Neon SRT4
04-10 Dodge Ram 1500/2500 (Gas)
11-16* RAM 1500/2500/3500 (non-Diesel, Gas Only)
03-07 Dodge Ram 2500/3500 5.9L (Diesel)
2014 Jeep Cherokee (3.2L)
06-10 Jeep Commander
07-10 Jeep Compass
07-10 Jeep Patriot
05-16* Jeep Grand Cherokee (all trims including SRT8)
05-13 Jeep Liberty
05-16* Jeep Wrangler

*Note: 2015-2016 vehicles need to have their PCMs unlocked via the PCM Modification Service before tuning.

We also have beta support for the Gen 4 and Gen 5 Dodge Viper. Please see: Dodge Viper GEN IV and GEN V Thread regarding Dodge Viper support.

If you are unsure whether your vehicle is supported, please email support with a VIN and we can check for you.

***2.25 Beta is required for all Dodge/Chrysler/Jeep/RAM vehicles. Make sure to download the latest beta from your customer page as new calibrations are added daily. If the beta download link isn't posted to your customer page, to receive access to the latest beta you will need to contact support at: Contact Us requesting access and we'll post it to your customer page. Please include your serial number in the email requesting beta access.***

Thanks!

Attachment 47781 Attachment 48576Attachment 48892Attachment 49534

For a complete list of supported vehicles see: HP Tuners.com Supported Vehicle List

If you want to know what PCM is in your supported vehicle see: PCM Identification Thread

Are 2004-06 RAM SRT10's supported?

[ElecTech]

Are 2004-06 RAM SRT10's supported?

Last time I checked, they are still read support only. You can open some reds and poke around, but there is still no licensing and writing on JTEC pcms.

[Boosted CC]

I need the latest Beta to work with my 2002 Dodge Dakota, where do I get it?

[Mark@HPTuners]

I need the latest Beta to work with my 2002 Dodge Dakota, where do I get it?

Please email support. Include your serial number in the email.
Just note that tuning is not yet supported for your 2002 Dodge Dakota.

[Blown383]

In for an update on NON-CAN NGC3 SRT4 and GPEC1 SRT4 datalogging? Knock retard on these platforms would sure make my job easier! Good job guys! Keep up the good work!

[Srtboost4u]

In for an update on NON-CAN NGC3 SRT4 and GPEC1 SRT4 datalogging? Knock retard on these platforms would sure make my job easier! Good job guys! Keep up the good work!

x2